Advertisement
When the speaker is off, press and hold the Multi-function Button(MFB) for 3 seconds, The LED indicator will flash slowly in blue. At this time you will hear a tone that increases in volume from the speaker of the set. The speaker will be paired with the last connected bluetooth device or mobile phone automatically when turned on.
When the speaker is on, press and hold the MFB for 4 seconds. The LED indicator will flash slowly in red. At this time, you will hear a tone that decreases in volume from the speaker of the set. The speaker will disconnect from your phone devices when turned off.
When the speaker is OFF,(And confirm the line in port without 3.5mm audio cable) press and hold MFB for 6 seconds until the LED indicator flashes red and blue in alternating colors.
Notes: 3mins pairing time, if not connect with any device, it will quit pairing mode.
If a call comes in when listening to music or speaker is standing by, press the MFB to answer the incoming call. If the music is playing, it will pause automatically during the call. After finishing your call, the music will start playing automatically.
If a call comes in when listening to music or speaker is standing by, press and hold the MFB for 2 seconds to reject the incoming call. After the call has been rejected, your music will start playing automatically.
To end a call, press the MFB.
To adjust the volume when talking on the phone, press the V+ or V- to adjust the volume up or down. When you reach the max/min volume, you will hear a warning tone.
When listening to music or speaker is standing by, double click the MFB to redial the last number. If you are listening to music, it will pause automatically during the call.
When talking on the phone, press and hold Vol+ or Vol- for 2 seconds to mute your microphone.
You will hear the caller, but the caller will not to hear you.
Note: There will be a warning tone every 3 seconds, reminding you that you are in mute mode.
Hold Vol+ or Vol- for 2 seconds to exit mute mode.
When talking on the phone, double-click the MFB to switch the voice from your speaker to your mobile phone. By double clicking the MFB again, the voice will switch back to the speaker.
When the speaker and mobile phone are disconnected, press MFB, it will reconnect.
Note: Some devices may have a prompt screen, that will ask you if you would like to pair your device.
If your mobile phone supports this function, press and hold MFB for 2 seconds to activate voice command. If the headset is playing music, the music will be paused automatically during this time. By re-pressing and re-holding MFB for 2 seconds during the voice dial mode, voice dial will be canceled.
Note: Please refer to the manual of your mobile phone for voice-command dial support.
When listening to music, click MFB to pause music and click MFB again to restart music.
Press backward button.
Press forward button.
V3.0+EDR Bluetooth Technology
Profile supports: HSF, HFP, A2DP, AVRCP
Transmission Distance: 10 meters/33 feet
Transmission range: 2.40GHz~2.48GHz
Size: 137x10.3x38 mm
Net Weight: 176 grams
Music Time: 5 hours
Talk Time: 6 hours
Standby Time: 100 hours
Operating Temperature: -20-60°C
Device ID: B120
Pin Code: 0000
Charging | Red LED Light |
Charging Complete | Red LED light turn off |
Stand by | Blue LED light flashes twice every 5 seconds |
Power On (Talking) | Blue LED light flashes twice every 3 seconds |
Power On (Incoming Call) | Blue LED light flashes continuously |
Power On (Not Connected) | Blue LED light flashes once every 5 seconds |
Battery Low | Red LED light flashes once every 5 seconds |
Pairing Mode | LED light flashes in red and blue alternately |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the BT-120 and is the answer not in the manual?
Questions and answers