Table of Contents
Advertisement
Declaration of Conformity
Tiger APT/AGT Trolleys have a 5:1 factor of safety. They are tested in line with the requirements within applicable sections of the
European standard EN 13157: 2004+A1:2009 and the Australian standard AS1418.2. All items comply with the essential health
and safety requirements of the Machinery Directive 2006/42/EC. Tiger trolleys are third party verified by SGS Certificate
Number MDC 1302.
7. Troubleshooting
Problem
Cause
Trolley Seized
Wear and tear
Poor maintenance and inspection
Poor storage and handling
Trolley is overloaded
Difficulties adjusting
Damaged or distorted adjusting screw.
trolley to beam
Hand chain catches
Damaged hand chain, hand chain wheel,
or jams (for AGT
pinion.
geared trolley)
Poor maintenance and inspection.
Hand chain not installed properly (twisted or
kinked).
Unit 1, Greensfield Industrial Estate,
Willowburn Avenue,
ALNWICK, NE66 2DG
Solution
Lubricate any moving parts/Replace trolley
Refer to manual for maintenance and inspection
details
Refer to manual for storage information.
Load trolley to rated capacity only
Replace damaged components.
Replace damaged components or replace trolley.
Lubricate exposed trolley drive pinion and wheel
teeth.
Remove hand chain and re-install.
www.tigerlifting.com
Page 9 of 18
Manual Tiger APT-AGT En 201811 v2.2
Advertisement
Table of Contents
