1. Manuals
  2. Brands
  3. TURFCO Manuals
  4. Paint Sprayer
  5. T3200
  6. Operator's manual and parts list

TURFCO T3200 Operator's Manual And Parts List

Spreader sprayer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
T3200 Applicator
US Patents 8,056,828 - 8,632,018 - 9,321,075 - 10,194,582
DANGER -
IF INCORRECTLY USED THIS MACHINE CAN CAUSE SEVERE INJURY.
THOSE WHO USE AND MAINTAIN THIS MACHINE SHOULD BE TRAINED IN ITS PROP-
ER USE, WARNED OF ITS DANGERS, AND SHOULD READ THE ENTIRE
MANUAL BEFORE ATTEMPTING TO SET-UP, OPERATE OR SERVICE THE
MACHINE.
1655 101st Avenue NE • Minneapolis, Minnesota 55449-4420 USA
OPERATOR'S MANUAL
MAINTENANCE MANUAL
PARTS LIST
TURFCO
T3200
Applicator
Spreader Sprayer
Product Numbers:
85878 (with T-FLEX15 Tank Installed)
85879 (Applicator Only)
Starting Serial Number 420001
Manual Number 673182 Rev A
Phone (763) 785-1000 • FAX (763) 785-0556
2024 Turfco Mfg., Inc.
TURFCO MFG. INC.
®
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T3200 and is the answer not in the manual?

Questions and answers

Related Manuals for TURFCO T3200

Summary of Contents for TURFCO T3200

  • Page 1 ER USE, WARNED OF ITS DANGERS, AND SHOULD READ THE ENTIRE MANUAL BEFORE ATTEMPTING TO SET-UP, OPERATE OR SERVICE THE MACHINE. TURFCO MFG. INC. 1655 101st Avenue NE • Minneapolis, Minnesota 55449-4420 USA Phone (763) 785-1000 • FAX (763) 785-0556 2024 Turfco Mfg., Inc.

  • Page 2: Table Of Contents

    Parts Lists ..............................39 Decals ..............................72 Product Records IMPORTANT: Record the information from the serial number plate of your Turfco 3200 Applicator. It will be necessary to furnish your Product Number and Serial Number when ordering parts. T3200 Applicator...

  • Page 3: Specifications

    US Patents 8,056,828 - 8,632,018 - 9,321,075 - 10,194,582 TURFCO is a registered trademark of Turfco Manufacturing, Inc. ® T3200™ and VARI-RATE™ are trademarks of Turfco Manufacturing, Inc. SPYKER, ACCUWAY, and BORDER PATROL are trademarks of Spyker Spreaders, Brinly-Hardy, Inc. REMCO is a registered trademark of Remco Industries.

  • Page 4: General Safety Practices

    TURFCO T3200 APPLICATOR SAFETY General Safety Practices Safety on the job should always be a top priority. spraying chemicals and fertilizers. Training and experience are important factors in the ● Eye Protection: Safety glasses and/or face shields safe operation of equipment. Please consider the...
  • Page 5 TURFCO T3200 APPLICATOR SAFETY ● Beware of slippery conditions. Wet turf can be ● Do not store, spill, or use gasoline near an open flame, encountered on slopes, when turning or stopping, or nor near an appliance like a stove, furnace, or water at higher speeds.

  • Page 6: Recognizing Safety Warnings And Chemical Hazards

    PROTECT YOURSELF FROM CONTACT, INHALATION, EXPOSURE AND/OR OVEREXPOSURE READ THE LABELS FROM THE PRODUCT. DANGER THE TURFCO T3200 DOES NOT PROTECT THE OPERATOR OR BYSTANDERS FROM THE HAZARDS OF EXPOSURE OR OVEREXPOSURE TO CHEMICALS. THE TURFCO T3200 DOES NOT PROTECT THE OPERATOR OR BYSTANDERS FROM THE HAZARDS OF CHEMICALS BEING USED DURING APPLICATION OR AFTER APPLICATION.

  • Page 7: Intended Use

    The T3200 is NOT intended to be used for any purpose other than the application of properly prepared turf care products to the turf. Operation is intended to be at properly prepared worksites only.

  • Page 8: Operation - Driving Operation - Check List

    TURFCO T3200 APPLICATOR OPERATION OPERATION Before operating the T3200 Series Applicator and before starting the engine: 1. Read the Operators Manual. 2. Install battery (lift up LH side of T-FLEX15 tank if installed). 3. Check the oil in the engine.

  • Page 9: Starting The Engine

    OPERATION TURFCO T3200 APPLICATOR DRIVING CONTROLS Locate the Parking Brake. Test the movement of the lever to the ON and OFF positions. The brake should always be set in the ON position when the operator is not present on the machine.

  • Page 10: Driving The Machine

    Using Forward Speed Control Pedal (See Figure 4) The T3200 Applicator has a “Forward Speed Control Pedal”. This pedal can be used to control forward speed, the same as the forward speed control handles. This allows the operator...
  • Page 11 Steering the Machine Now you are ready to try the steering and driving the machine on the parking lot. Like your car, the Turfco T3200 Applicator steers uses a steering wheel. A full spin to the right will give you a full right turn and a full spin to the left give you a full left turn.
  • Page 12 (See Figure 5) Now that you are familiar with driving the T3200 Applicator, you are ready to try all the same turns and maneuvers you learned in the parking lot on the lawn. Now you are ready to move up into the lawn and practice turns, trimming, getting close around trees and obstacles.
  • Page 13 ● Do not operate the machine across the face of a slope or at 90º degree angles to the slope. WARNING The Turfco T3200 Applicator is not designed to be operated on any incline or slope exceeding 15º degrees. Operation on inclines of more than 15º degrees can result in injury and/or damage to the machine.

  • Page 14: Spreader

    TURFCO T3200 APPLICATOR OPERATION THE SPREADER The spreader has several components and controls you should be familiar with before operating the machine. 1. SPREADER HOPPER (See Figure 7) - The spreader hopper size is 2.9 cubic feet and holds 175 pounds (0.08 Cubic Meter/ 79.4 Kg.) of material.
  • Page 15 OPERATION TURFCO T3200 APPLICATOR 5. SPINNER SPREADER WHEEL (See Figure 8 and 9) - The Spinner Wheel broadcasts the SPREADER SPINNER material from the hopper. The speed of the WHEEL SPEED spinner wheel is controlled by the Spinner Speed CONTROL NARROW Control.

  • Page 16: Operation For Trimming

    TURFCO T3200 APPLICATOR OPERATION HANDLE PULLED HANDLE PUSHED HANDLE TIPPED HANDLE PUSHED FULLY BACK FORWARD TO OUT TO BYPASS FULLY FORWARD TO CLOSE VARI-RATE 60% VARI-RATE STOP FOR 100% GATE STOP SETTING GATE OPENING VARI-RATE ADJUSTABLE GATE STOP SPREADER GATE...

  • Page 17: Spreading Operation On The Lawn

    1. Practice with the T3200 before you try to operate it on a lawn. Practice in all kinds of conditions for at least 30 minutes. Simulate close quarter operation (i.e.

  • Page 18: Sprayer Controls And Components

    The gauge should read 40 PSI when spraying. Note: If the tanks are empty, the gauge will read zero. 4. TANKS (See Figure 15) - The Turfco T3200 Applicator has two liquid tanks. Each tank has a capacity of 10 gallons for a total of 20 gallons (75.1 liters).
  • Page 19 OPERATION TURFCO T3200 APPLICATOR SPINNER SPRAY PRESSURE SPEED FORWARD FORWARD TRIM SPRAY SPRAY GUN FULL SPRAY SPRAY CONTROLS REVERSE REVERSE PUMP SPRAY GUN TRIM FULL SPRAY PRESSURE CONTROL SPRAY CONTROL CONTROL GAUGE PUMP PRESSURE CONTROL PUMP KNOB FORWARD FORWARD TRIM SPRAY...
  • Page 20 TURFCO T3200 APPLICATOR OPERATION FULL (WIDE) TANKS SPRAY NOZZLE POINT DOWN TOWARDS TURF 15º TO 25º DEGREES FULL SPRAY TRIM SPRAY NOZZLE TRIM SPRAY OP85878-20RevA SET LEVEL WITH TURF FRONT COVER FIGURE 15 85878 & 85879 RevA...

  • Page 21: Spraying Operation

    Practice spray 3’ to 4’ feet wide. The spray will start 2” to 3” with the T3200 before you try to operate it on a lawn. inches to the left of the left front tire.

  • Page 22: Transporting The Machine To The Worksite

    Transporting the Machine to the Worksite Whether you use trailers, carriers or a pickup, loading and unloading the T3200 Applicator is very easy using the hydrostatic drive. Just approach the load area or ramps, get off the machine and slowly walk it into or onto the transport device.

  • Page 23: Troubleshooting Tables

    OPERATION TURFCO T3200 APPLICATOR TROUBLESHOOTING TABLE PROBLEM POSSIBLE CAUSE GROUND SPEED ENGINE RPM INCORRECT (Should be 3000 +/- 100) WRONG MISADJUSTED TRANSAXLE ADJUSTMENT ROD V-BELT TO TRANSAXLE DAMAGED OR MISADJUSTED PARKING BRAKE ON OR NOT DISENGAGING OVERLOADED TRANSAXLE PROBLEMS STEERING PROBLEMS...
  • Page 24 OPERATION TURFCO T3200 APPLICATOR TROUBLESHOOTING TABLE PROBLEM POSSIBLE CAUSE SPRAYER PROBLEMS NO PRESSURE OR BLOCKED FILTER LOW PRESSURE SHUTOFF VALVE IN OFF POSITION PUMP FUSE BLOWN (30 Amp) PUMP FAILURE HOSES FROM TANK TO PUMP BLOCKED OR KINKED HOSES FROM PUMP TO REGULATOR BLOCKED OR KINKED...

  • Page 25: Spreader Calibration

    SPREADER CALIBRATION TURFCO T3200 APPLICATOR Calibration of Machine Speed Calibrate the machine for 5 mph forward speed. Calibration should only be done by licensed persons. Mark a length of 88 feet on a level surface. A. With a running start, time how long it takes to travel the 88 ft B.
  • Page 26 SPREADER CALIBRATION TURFCO T3200 APPLICATOR Calibration of Spreader Calibrate the spreader for the product desired. See the product label for application rates. Calibration should only be done by licensed persons. Full Spread Calibration This will set the fertilizer application rate when spreading at the full width setting of 18 feet (9 feet effective width, covering 4000 ft²...
  • Page 27 SPREADER CALIBRATION TURFCO T3200 APPLICATOR Setting the “Accuway” Spread Pattern Adjuster (See Figure 20 and Figure 21) The Accuway Spread Pattern Adjuster is a black plastic wedge that is under the spreader gate opening. When the gate is opened, the Accuway wedge controls where the material lands on the spinner wheel. This affects the throw of the material.

  • Page 28: Sprayer Calibration

    SPRAYER CALIBRATION TURFCO T3200 APPLICATOR Calibration of Sprayer Calibrate the sprayer for the product desired. See the product label for application rates Calibration should only be done by licensed persons. Perform all calibration using water only! Full Spray Calibration This will set the spray application rate when spraying with the full spray control at full width (sprays 11-12 feet, giving a 9 feet effective width once overlap is accounted for).
  • Page 29 Here is the spray rate chart for nozzles using the standard 5.3 GPM spray pump and operating at 5 mph: Nozzle Spray Rate (gallons per 1000 ft²) HF 140-10 HF 140-15 HF 140-20 To spray rates higher than 1/2 gallon per 1000 ft², contact Turfco about ordering a high spray rate kit. 85878 & 85879 RevA...

  • Page 30: Service And Maintenance

    ● Inspect all the operator controls for proper Do Not Service, Inspect, Lubricate Or operation. Adjust The T3200 With Any Part of the ● Check the tires for proper inflation. Sprayer or Spinner Assembly Operating ● Inspect the spinner assembly spinner wheels.

  • Page 31: Inspection And Cleaning

    Refer to Lubrication Section in this Manual. Storage Winter Storage Protection Against Freeze Damage TO STORE THE T3200 OVER AN EXTENDED PERIOD, perform a complete inspection. Refer any The pump, tanks and spray system must be protected needed service or repair to service level personnel.

  • Page 32: Lubrication

    SERVICE AND MAINTENANCE TURFCO T3200 APPLICATOR Lubrication ENGINE AND TRANSAXLE (See Figure 25) REMOVE STORAGE TRAY Engine: CHECK OIL LEVELS DAILY. Follow the TO CHECK ENGINE engine manufacturer’s manual for intervals of oil TRANSAXLE ENGINE change, oil filter replacement, and proper oil types.

  • Page 33: Recommended Service Schedule

    SERVICE AND MAINTENANCE TURFCO T3200 APPLICATOR T3200 Recommended Service Schedule PERFORM EVERY WHEN TO PERFORM SERVICE CLEAN OFF FERTILIZER WITH AIR IF NECESSARY WASH WITH WATER INSPECT HARDWARE GREASE FITTINGS (7) ENGINE CHECK OIL LEVEL CHANGE OIL & FILTER 5 hrs...

  • Page 34: Location Of Spray System Shutoff Valve And Strainer Screen

    SERVICE AND MAINTENANCE TURFCO T3200 APPLICATOR LOCATION OF SPRAY AS VIEWED FROM BOTTOM SYSTEM SHUTOFF VALVE AND STRAINER SCREEN (See Figure 27) When the handle on the shutoff valve is pulled down, flow from the tanks is stopped (closed). Remove...

  • Page 35: V-Belt Identification

    SERVICE AND MAINTENANCE TURFCO T3200 APPLICATOR V-BELT IDENTIFICATION (See Figure 29) A. Hopper Pulley to Variator Pulley - 24” 3L SECTION B. Variator Pulley to Reduction Pulley - 24” 3L SECTION C. Reduction Pulley to Engine Pulley - 33” 3L SECTION D.

  • Page 36: Electric Start Wiring Diagram

    SERVICE AND MAINTENANCE TURFCO T3200 APPLICATOR ELECTRIC SYSTEM TO IGNITION SWITCH (ORG) (2X BLK) S M L (YEL) S (RED) (TAN) TO T-FLEX15 TANK TO SPRAY VIEWED FROM REAR PUMP SWITCH PUMP SWITCH (WIRE SIDE) OF CONNECTOR RED/WHTE 12 GA...

  • Page 37: Electrical Power Supply Connection

    SERVICE AND MAINTENANCE TURFCO T3200 APPLICATOR Electrical Power Supply Connection CAUTION POWER IN WARNING DO NOT Use the Power Supply To Power Sensitive YELLOW BLACK Electronic Equipment (Phones, Computers, Etc.). Power Levels, Power Fluctuation and Spikes Can Occur VOLTAGE REGULATOR and Will Damage Sensitive Equipment.

  • Page 38: How To Obtain Parts And Service

    SERVICE AND MAINTENANCE TURFCO T3200 APPLICATOR How To Obtain Parts and Service Contact TURFCO to order parts or to arrange repair DO NOT ALTER the TURFCO T3200 APPLICATOR service. For a list of authorized TURFCO dealers in any manner. Unauthorized alterations may affect its...

  • Page 39: Parts Lists

    TURFCO MFG., INC. 1655 101st Avenue NE Minneapolis, Minnesota USA 55449-4420 www.turfco.com (763) 785-1000 FAX (763) 785-0556 PRODUCT SERIAL PRODUCT NUMBER SERIAL NUMBER 85878 - T3200 Applicator With Factory Installed T-Flex15 Tank 85879 - T3200 Applicator 85878 & 85879 RevA...
  • Page 41 PARTS LISTS TURFCO T3200 APPLICATOR Lower Frame Group Assembly APPLY BLUE LOCTITE TO SCREW THREADS 24 23 28 27 PL85878-03RevA 85878 & 85879 RevA...
  • Page 42 TURFCO T3200 APPLICATOR PARTS LISTS Lower Frame Group Assembly Item Part Description Qty. 300110 SCREW, CAP, 1/4-20 X .75, SS ..............1 300260 SCREW, CAP, 5/16-18 X 3-1/4, HEX HD, S.S........8 300325 SCREW, CAP, 3/8-16 X 1.5, HEX HD, S.S..........2 300330 SCREW, CAP, 3/8-16 X 1 3/4, HEX HD, S.S.
  • Page 43 PARTS LISTS TURFCO T3200 APPLICATOR Cross Member Assembly TIGHTEN TENSIONER ROD UNTIL SPRING MEASURES 5-3/8” AS SHOWN WITH BELT INSTALLED. PL85878-33RevA 85878 & 85879 RevA...
  • Page 44 TURFCO T3200 APPLICATOR PARTS LISTS Cross Member Assembly Item Part Description Qty. 302310 NUT, NYLOC, 3/8-16, SST ..............1 303040 WASHER, FLAT, .406 ID X .81 OD X .066 THICK SS ......2 667138 PULLEY, FLAT IDLER WITH SPACER ..........1 672374 WELDMENT, IDLER ARM.
  • Page 45 PARTS LISTS TURFCO T3200 APPLICATOR Rear Axle Group Assembly DETAIL A FOOT SEE UPPER LINKAGE DETAIL PEDAL ASSEMBLY DETAIL B SEE WHEEL HUB DETAIL 14 9 UPPER BOTH APPLY BLUE LOCTITE LINKAGE SIDES TO SCREW THREADS RETAINING RING OUTWARD WHEEL HUB DETAIL - REAR VIEW...
  • Page 46 TURFCO T3200 APPLICATOR PARTS LISTS Rear Axle Group Assembly Item Part Description Qty. 300101 BOLT, SHOULDER, 1/4”-20UNC-2A SS ..........1 300110 SCREW, CAP, 1/4-20 X .75, SS ............1 300215 SCREW, CAP, 5/16-18 X 3/4 SS ............2 300237 SCREW, CAP, 5/16-18 X 2-1/4, HEX HD, SST ........2 301111 BOLT, CARR, 1/4-20 X 3/4, SST ............4...
  • Page 47 PARTS LISTS TURFCO T3200 APPLICATOR Transaxle Service Parts TORQUE TO 40 FT/LBS (480 IN/LBS) (54.24 NM) PARKING BRAKE SERVICE PARTS TRANSMISSION ARM PL85878-32 RevA 85878 & 85879 RevA...
  • Page 48 TURFCO T3200 APPLICATOR PARTS LISTS Transaxle Service Parts Item Part Description Qty. 672546 ASSEMBLY, FAN PULLEY KIT, 17 TOOTH SPLINE, INCLUDES NUT AND WASHER ................1 667206 FILTER, TRANSAXLE ................1 668807 GUARD, TRANSAXLE FILTER, METAL ..........1 668327 SEAL, AXLE SHAFT, TRANSAXLE ............2 669236 O-RING, SEAL, 2.05”...
  • Page 49 PARTS LISTS TURFCO T3200 APPLICATOR Control Console Group Assembly CONTROL SHAFT ARM DAMPENER LOWER LINKAGE FRONT CONTROL SHAFT DETAIL SEE CONTROL SHAFT DETAIL 20 (LH THD) EA SIDE CONTROL LEVERS ASSEMBLY EA SIDE 21 (RH THD) TO TRANSAXLE PL85878-06RevA 85878 & 85879 RevA...
  • Page 50 TURFCO T3200 APPLICATOR PARTS LISTS Control Console Group Assembly Item Part Description Qty. 300105 SCREW, CAP, 1/4-20 X 1/2, HEX HD, S.S...........4 300235 SCREW, CAP, 5/16-18 X 2 SS .............2 300310 SCREW, CAP, 3/8-16 X 1.00, HEX HD, S.S.........2 300325 SCREW, CAP, 3/8-16 X 1.5, HEX HD, S.S.
  • Page 51 PARTS LISTS TURFCO T3200 APPLICATOR Steering Control Group Assembly GATE & SPINNER SPEED LEVER ASSEMBLY INSTALL TO GATE LEVER INSTALL VARIATOR LEVER DETAIL B INSTALL TO FRAME STEERING PL85878-07RevA ASSEMBLY 85878 & 85879 RevA...
  • Page 52 KNOB, STEERING WHEEL ..............1 672985 STEERING WHEEL ................1 673105 COVER, FRONT DASH ................1 673108 COVER, REAR CONSOLE ..............1 673180 DECAL, IGNITION, T3200 ..............1 667342 STOP, PARTIAL GATE ................1 667343 PLATE, CLAMP ..................1 667346 WELDMENT, GATE SHAFT ..............1 662516 KNOB, LOCKING ..................1 667377 ASSEMBLY, GATE HANDLE ..............1...
  • Page 53 PARTS LISTS TURFCO T3200 APPLICATOR Front Axle Group Assembly PEEL BACK HEAT SHRINK FROM THREADS AS NEEDED WHEN TIGHTING STEERING CABLES CLEVIS ASSEMBLY ATTACH TO STEERING CHAIN IN CONSOLE 19 12 CLEVIS ASSEMBLY SEE CLEVIS DETAIL CONFIRM ROLLER BEARINGS ARE...
  • Page 54 TURFCO T3200 APPLICATOR PARTS LISTS Front Axle Group Assembly Item Part Description Qty. 300205 SCREW, CAP, 5/16-18 X 1/2 SS ............2 300435 SCREW, CAP, 7/16-14 X 1-3/4 SS ............2 300440 SCREW, CAP, 7/16-14 X 2-1/4 SS ............1 301211 BOLT, CARR, 5/16-18 X 3/4 SST ............4 301317 BOLT, CARR, 3/8”-16 X 1 1/4 LG, 304 SST .........4...
  • Page 55 PARTS LISTS TURFCO T3200 APPLICATOR V-Belt Group Assembly INSTALL TO LOWER FRAME SPINNER PULLEY ASSEMBLY ENGINE CRANKSHAFT APPLY BLUE LOCTITE TO THREADS INSTALL TO TRANSAXLE SPINNER PULLEY PL85878-09RevA 85878 & 85879 RevA...
  • Page 56 TURFCO T3200 APPLICATOR PARTS LISTS V-Belt Group Assembly Item Part Description Qty. 300117 SCREW, CAP, FLANGE, 1/4-20 X 1.0, SST .........5 300433 SCREW, CAP, 7/16-20 X 1-1/2 SS ............1 302110 NUT, HEX 1/4-20 NYLOCK, SST ............5 302310 NUT, NYLOC, 3/8-16, SST ..............1 302905 NUT, NYLOC, M8-1.25 METRIC, SST ..........1...
  • Page 57 PARTS LISTS TURFCO T3200 APPLICATOR Upper Frame Group Assembly WAND TUBE ASSEMBLY PL85878-11RevA 85878 & 85879 RevA...
  • Page 58 TURFCO T3200 APPLICATOR PARTS LISTS Upper Frame Group Assembly Item Part Description Qty. 300225 SCREW, CAP, 5/16-18 X 1-1/2, HEX HD, SS ........1 300310 SCREW, CAP, 3/8-16 X 1.00, HEX HD, S.S.........4 301111 BOLT, CARR, 1/4-20 X 3/4, SST ............2 301211 BOLT, CARR, 5/16-18 X 3/4 SST ............2...
  • Page 59 PARTS LISTS TURFCO T3200 APPLICATOR Hopper Group Assembly TRIM SPRING 35 34 37 35 41, 25 TRIM DEFLECTOR PL85878-12RevA 85878 & 85879 RevA...
  • Page 60 TURFCO T3200 APPLICATOR PARTS LISTS Hopper Group Assembly Item Part Description Qty. 667706 HOPPER, SPREADER (HOPPER ONLY - NO OTHER PARTS INCLUDED) .................1 667707 ASSEMBLY, DIAL .................1 300105 SCREW, CAP, 1/4-20 X 1/2, HEX HD, S.S..........8 667749 SPINNER, WHEEL ................1 667752 SHAFT, SPINNER ................1...
  • Page 61 PARTS LISTS TURFCO T3200 APPLICATOR Spray Group Assembly CONTROLS AND FITTINGS 35 16 U-CLAMP ASSEMBLY SEE NOZZLE ASSEMBLY SPRAY CONTROL AND PUMP ASSEMBLY RH TANK NOZZLE LH TANK ASSEMBLY FILTER ASSEMBLY TANK SADDLE ASSEMBLY EA SIDE PL858378-13ReA 85878 & 85879 RevA...
  • Page 62 TURFCO T3200 APPLICATOR PARTS LISTS Spray Group Assembly Item Part Description Qty. 300110 SCREW, CAP, 1/4-20 X .75, SS ................... 3 300125 SCREW, CAP, 1/4-20 X 1-1/2, HEX HD, S.S..............4 300215 SCREW, CAP, 5/16-18 X 3/4 SS .................. 8 300225 SCREW, CAP, 5/16-18 X 1-1/2, HEX HD, SS ...............
  • Page 63 PARTS LISTS TURFCO T3200 APPLICATOR Spray Group Hoses and Clamps HOSES AND CLAMPS 17 13 18 7 TO PUMP OUTLET TO RH TANK TO LH TANK 7, 13 7, 13 PUMP INLET SEE NOZZLE ASSEMBLY RH TANK TO STRAINER LH TANK...
  • Page 64 TURFCO T3200 APPLICATOR PARTS LISTS Spray Group Hoses and Clamps Item Part Description Qty. 673154 HOSE, SUCTION, 3/4 ID X 23.5 LG ................1 673155 HOSE, SUCTION, 3/4 ID X 9.75 LG ................1 673156 HOSE, SUCTION, 3/4 ID X 17.5 LG ................1 673157 HOSE, SPRAY, 1/2 ID X 39 LG ..................
  • Page 65 PARTS LISTS TURFCO T3200 APPLICATOR SPRAY MANIFOLD SV85878-85879-41RevA Item Part Description Qty. 673135 VALVE, MANIFOLD ................1 673138 HOSEBARB, MANIFOLD, 3/8” .............1 673139 HOSEBARB, MANIFOLD, 1/2” .............1 673136 FORK, TWO VALVES ................1 673137 FORK, ONE VALVE ................1 85878 & 85879 RevA...
  • Page 66 TURFCO T3200 APPLICATOR PARTS LISTS TANK ASSEMBLIES LH TANK RH TANK NOTE: RUBBER GASKET GOES ON INSIDE OF TANK FOR ALL BULKHEAD FITTINGS. SV85878-85879-40RevA Item Part Description Qty. 673044 TANK, LH, 10 GAL..................... 1 667847 BULKHEAD FITTING, 3/4 NPT.................. 1 673110 BULKHEAD FITTING, ANTI-VORTEX ...............
  • Page 67 PARTS LISTS TURFCO T3200 APPLICATOR Engine Group Assembly and Fuel Tank TO FUEL TANK FUEL TANK SUPPORT TORQUE TO 15 FT/LBS (180 IN/LBS) (20.3 NEWTON METERS) FUEL FILTER PL85878-14RevA 85878 & 85879 RevA...
  • Page 68 TURFCO T3200 APPLICATOR PARTS LISTS Engine Group Assembly and Fuel Tank Item Part Description Qty. 300107 SCREW, CAP, 1/4-20 X 3/4, FLANGE, S.S..........4 300117 SCREW, CAP, FLANGE, 1/4-20 X 1.0, SST .........2 300235 SCREW, CAP, 5/16-18 X 2 SS .............3 300237 SCREW, CAP, 5/16-18 X 2-1/4, HEX HD, SST ........1...
  • Page 69 PARTS LISTS TURFCO T3200 APPLICATOR Electric Start Group TO ENGINE STARTER TO BATTERY BLACK TO BATTERY DETAIL A SOLENOID & BRACKET STARTER SOLENOID (YELLOW WIRE) SOLENOID RED TO (+) GROUND BLACK TO (-) (BLACK WIRE) FRONT TO STARTER BATT. TERMINAL...
  • Page 70 SWITCH, IGNITION, 3 POSITION ............1 669905 BRACKET, BATTERY BOX ..............1 673106 CHARGER, USB ...................1 673148 WIRING HARNESS, T3200 ..............1 673149 RELAY, SPST, ISO 280 ULTRA MICRO, 30A ........1 673150 FUSE, 15 AMP, TYPE MINI, BLUE ............1 673151 FUSE, 25 AMP, TYPE MINI, CLEAR ............1 673152 FUSE, 30 AMP, TYPE MINI, GREEN ...........1...
  • Page 71 PARTS LISTS TURFCO T3200 APPLICATOR MODEL 85878- T-FLEX15 TANK FACTORY INSTALLED. SEE T-FLEX15 TANK MANUAL 672797 FOR T-FLEX15 OPERATING INSTRUCTIONS AND PARTS LIST. MODEL 85879- NO T-FLEX15 TANK INSTALLED FROM FACTORY. SEE BELOW FOR TRAY PARTS LIST. Tray Parts SV85879-42RevA...

  • Page 72: Decals

    DECAL, SPRAY PUMP ON/OFF ................1 DECAL, CA, WARNING ..................... 1 DECAL, T3200 LOGO....................1 673185 DECAL SHEET, LOGOS, T3200, INCLUDES ITEMS 24, 25 AND 26 ......1 DECAL, TURFCO LOGO, 8-3/4” INCH..............1 DECAL, HAND HAZARD WARNING TRIANGLE ............1 DECAL, THROWN OBJECT WARNING ..............
  • Page 73 DECALS TURFCO T3200 APPLICATOR Decals FORWARD FORWARD TRIM SPRAY SPRAY GUN FULL SPRAY SPRAY CONTROLS REVERSE REVERSE WIDE SPINNER SPRAY PRESSURE NARROW SPEED OPEN CLOSE PL85878-16RevA 85878 & 85879 RevA...
  • Page 74 DECALS TURFCO T3200 APPLICATOR Decals A. DASHBOARD DECAL N. MAXIMUM ANGLE OF OPERATION WARNING DECAL B. THROTTLE CONTROL DECAL PERSONAL PROTECTION WARNING DECAL C. PARKING BRAKE LEVER DECAL O. HAND HAZARD WARNING DECALS D. GROUND SPEED LOCK PEDAL DECAL P. MAXIMUM OPERATOR WEIGHT WARNING DECAL E.
  • Page 75 1655 101 Avenue NE • Minneapolis, MN 55449–4420 USA Phone (763) 785–1000 • FAX (763) 785–0556 Internet - www.turfco.com E-Mail - service@turfco.com Turfco Part No. 673182 Rev A TURFCO T3200 Applicator Printed in USA Product Numbers 85878 & 85879 0224...

Table of Contents

Save PDF