Table of Contents
Advertisement
en Buttons
Button
(mains switch)
Remote Start
3 sec.
Basic Settings
More
Mini Load
24
Selection
- 1600
¡ Switch on
¡ Standby mode
¡ Restart the ap-
pliance
¡ Activate
¡ Deactivate
¡ Open the
Home Connect
menu
¡ Activate
¡ Deactivate
Multiple selection
¡ Displaying or
hiding addi-
tional buttons
¡ Adjusting the
display of addi-
tional buttons
¡ Activate
¡ Deactivate
More information
Adjust the spin speed or activate
(Rinse Hold).
Set spin speed in rpm.
If
is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
Switch on the appliance or put it in
standby mode.
If the control panel does not respond,
press and hold
5 seconds to restart the appliance.
→ "The appliance is not working.",
Page 47
→ "Remote start", Page 36
→ "Childproof lock", Page 34
→ "Basic settings", Page 38
¡ If you briefly press the button, you
can display or hide additional but-
tons.
→ "Displaying or hiding additional
buttons", Page 19
¡ If you press and hold the button for
approx. 3 seconds, you can adjust
the display for the additional but-
tons.
→ "Adjusting the display of addi-
tional buttons", Page 19
Wash small loads of delicate or hard-
wearing fabrics.
The programme duration is shortened,
and the water and energy consump-
tion adjusted to the load.
Note: If you activate the setting, the
programme's maximum load capacity
is reduced to 0.5 kg.
for approximately
Advertisement
Table of Contents
