Advertisement
GENERAL INFORMATION
Application
mD-1c driver is designed for power supply of standard LEDs produced by LED
Microsensor NT.
Features
• QCW mode of operation (mode that provides maximum average optical power)
with fixed signal data parameters (amplitude, repetition rate and pulse duration).
• Possibility of synchronisation with an external device (such as LMSNT SDM
synchronous detector) with the help of synchronisation output.
Operation Conditions
Indoor operation only. Ingress Protection Rating IP00.
Operation Mode Description
*Current value can be changed by manufacturer for enabling the most optimal performance with the
exact LED-photodiode pair.
Precautions
•
Turn on the power supply of the LED Driver only after all connections are made
and tested.
•
Mount or dismount the LED Driver in power-off state only, otherwise it can lead to
breakdown.
•
Ingress protection rating of the LED Driver is IP00, so please assure the protection
of the driver.
•
Do not use multimeter to control and adjust current of the LED.
Note! Please refer to your provider if you have any questions.
10, A, Kurchatova str., 1N, St-Petersburg, 194223, Russia
Signal waveform generated by the driver
LED Microsensor NT, LLC
*
● info@lmsnt.com ● www.lmsnt.com
3
Advertisement
