Table of Contents
Advertisement
o Makesurethewatersupply faucetis easilyaccessible
whenthewasher is in use.Thefaucetshouldbe
turnedoff ifthe washer is goingto be unused for
extended periodsof time.
o Makesurerubber washers areinplaceatbothendsof
the watersupplyhose.Missing washers couldcause
leaks.
o Theconnection pointsareunderfull waterpressure.
Turnonthe watertap andcheckfor leaks.
o Periodically inspectthewatersupplyhoseandreplace
witha newhoseif cuts,kinksor leaksareobserved.
Waterconnection hoses
o red- Hotwater-hose
o blue- Coldwater-hose
i i ¸
About the AquaShield Hose
The AquaShield
hose prevents potential flooding
in the
event the hose develops an internal leak. If the hose
leaks, the indicator turns red and water flow is blocked.
Water drain hose connection
NOTICES
o Do not reuse an old drain hose. Only use the drain
hose and parts included with your washer.
o Do not kink or modify the water drain hose.
Height of drain point
Height difference between the floor and drainage point:
max. 39 in. (100 cm).
Types of drainage hookups
Standpipe
Attach this end to water tap, Hand tighten only.
Attach this end of the hose to the back of the washing
machine, Hand tighten only.
Attach the drain hose using the elbow included with your
washer.
Fit the drain hose to the elbow provided leaving a
maximum of 4 inches of drain hose projecting.
Insert this
section of the drain hose into the drain pipe. Secure the
elbow and hose with a nylon tie strap or the equivalent to
keep the hose from coming out of the drain pipe during
use.
Sink siphon
Secure the drain hose to the sink siphon using a O 0.9 -
1.6 in. (20-44 mm) hose clip (available from a hardware
store).
13
Advertisement
Table of Contents
