Pvm Setup - Hanwha Vision SMT-3221PV Manual

PVM SETUP

Monitor setup
You can control the power of the PVM or set the monitor's screen
mode.
1. From the Setup menu, select the <Video & Audio setup> tab.
2. Click <PVM setup>.
3. Click <Monitor setup>.
~ Remote control : Not to use the remote control when
controlling the monitor, uncheck <Enable>.
~ Monitor power : You can turn on and off the monitor from the web viewer. Click the [ON] button to
turn on the monitor, or click the [Off] button to turn off the monitor.
~ Screen mode : You can set the screen mode.(SMT-2731PV/SMT-3231PV only)
` Single : It outputs the image from the built-in camera.
` PIP : You can select the PIP (Picture-in-picture) mode. You can configure detailed settings for the main and
secondary screens.
` PBP : You can select the PBP (Picture-by-picture) mode.
Banner
You can display banners on the live video.
1. From the Setup menu, select the <Video & Audio setup> tab.
2. Click <PVM setup>.
3. Click <Banner>.
4. Click the [
Image files to be uploaded.
5. Select an image to upload and click <Install>.
The files uploaded in <Banner list> are displayed in a list.
- You can upload up to 2 banner images.
- For the file name, use only English letters, numbers, and a period. The file with special characters
cannot be uploaded.
- Image files can be uploaded only in JPG, PNG or BMP formats.
- The banners are positioned at the top of the screen by default.
- You can move a banner up and down by dragging with the mouse.
6. Checking the Enable box runs the feature.
- The banner feature works only on the live video.
] button to select the PC folder containing the
English _35