Menu Settings - Hanwha Vision SMT-3221PV Manual

menu settings

OSD MENU SETTING (SMT-1031PV/SMT-1031PVW)
Selecting OSD menu
You can select the OSD menu by pressing the [MENU/EXIT] button on the remote controller.
1. Press the _/+ buttons to select the main menu
2. Press the $/% buttons to select the sub-menu, and then press the ENTER.
3. Press the $/%/_/+ buttons to adjust the adjustment value.
4. Press the MENU/EXIT button to exit.
Picture Menu
1. Press the MENU/EXIT button to enter the main menu.
2. Press the _/+ button to select <PICTURE>, and then press the ENTER.
3. The PICTURE Menu can be selected from the following 3 modes by pressing $/% buttons.
~ Picture Mode : Adjust setting of the picture. Picture Mode can select 4 modes as Standard, Soft,
~ Color Temperature : The color temperature can be adjusted and used depending on the monitor
~ Aspect Ratio : You can select a screen size you want. (Auto/4:3/16:9)
14_ menu settings
PICTURE
User and Vivid.
Three of the four modes except for User mode are shipped with fixed values at the
time of shipment from the factory.
color. Color Temperature can select 4 modes as Cool, Medium, Warm and User.
Three modes except User mode are factory shipped with factory default values,
and each color item (Red, Green, Blue) is selected with the $/% buttons in the
User mode only.
Picture Mode Standard
Color Temperature Medium
Aspect Ratio Auto