REPLACEMENT PARTS Description Locking Ring Pressure Gauge Lid O-Ring Body CFX-50/CFX-75/CFX-100 Drain Plug Drain Plug O-Ring Air Release Valve Air Release Valve O-Ring Safety Plug Locking Latch Element CFX-50/CFX-75/CFX-100 other Union Set 40mm PVC...
4. Sun Protection: FILTER LOCATION • If possible, consider placing the pump and filter Before beginning the installation process, it is in a shaded area to shield them from continuous important to determine the location of your pump and direct heat from the sun. and filter.
Page 5
• Connect pool suction plumbing between By following these installation steps, you can ensure a successful setup of your pool system. skimmer, pool outlet, etc., and the pump. 5. Pool Return Plumbing: • Install pool return plumbing for proper water STARTING THE CARTRIDGE FILTER circulation back to the pool.
Page 6
• Any air trapped in the system will cartridge. Cartridges have a normal life span of two years with frequent cleaning. automatically be vented to the pool and out b. Algae, Sunscreen oil, and body oils can of the air relief valve. •...
Page 7
All mechanical swimming pool products supplied to unless prior written approval has been granted by HY- consumers by HY-CLOR are to be installed or used in the CLOR and has been carried out by one of its authorized manner they are manufactured for only.
Page 8
Replacement warranty. parts. To make a claim please contact: HY-CLOR AUSTRALIA PTY LTD 178 POWER STREET GLENDENNING NSW 2761 FREE CALL NUMBER 5 DAYS A WEEK 1800 625 123. FILTERS Thermoplastic Sand Filters 19,22 and 24 inch •...
Need help?
Do you have a question about the CFX Series and is the answer not in the manual?
Questions and answers