Osaka M1 User Manual
Osaka M1 User Manual

Osaka M1 User Manual

Termologger usb

Advertisement

Quick Links

TERMOLOGGER USB
User Manual
INTRODUCTION
In this manual, you will find the necessary
information for the correct installation, use, and
maintenance of the product. It is recommended to
read it carefully and to keep it. This publication is
the exclusive property of OSAKA SOLUTIONS, which prohibits
reproduction and dissemination, even in part, unless expressly
authorized. OSAKA SOLUTIONS reserves the right to make
aesthetic and functional changes at any time and without
notice. In order to avoid irregular operation of the B4U or
malfunction that may create dangerous situations or damage to
people, property, or animals, it is important to comply with and
keep in mind the safety systems attached, necessary to ensure
safety. OSAKA SOLUTIONS and its legal representatives do not
assume any responsibility for damages to people, property, or
animals resulting from improper handling, misuse, incorrect
use, or, in any case, non-compliance with the characteristics of
the B4U.
SUMMARY
INTRODUCTION ........................................................................... 1
DESCRIPTION TERMOLOGGER USB ............................................ 1

1 - DESCRIPTION TERMOLOGGER USB ....................................... 2

1.1
2 - TECHNICAL DATA .................................................................. 2
2.1 - Technical Specifications .................................................. 2
2
- DEVICE OPERATION INSTRUCTION .................................... 2
3
INITIAL USE ......................................................................... 2
3.1
3.2
3.3
3.4
3.5
3.6
3.7
4
- KEY FUNCTION DESCRIPTION ........................................... 3
5
- BATTERY MANAGEMENT .................................................. 3
5.1
5.2
6
- LCD DISPLAY NOTICE ....................................................... 3
7
8
- APPENDIX 2 - OTHER LCD DISPLAY ................................. 4
9
- APPENDIX 3 - LCD PAGE DISPLAY .................................... 5
Osaka Solutions S.L - TERMOLOGGER USB - User Manual
comercial1@osakasolutions.es
DESCRIPCIÓN GENERAL ............................................... 2
CONFIGURATION OPERATION ...................................... 2
LOGGER START OPERATION ......................................... 2
PAUSE OPERATION ....................................................... 2
MARK OPERATION ........................................................ 2
STOP OPERATION ......................................................... 2
VIEWING OPERATION ................................................... 3
MULTIPLE START .......................................................... 3
BATTERY LEVEL INDICATION ....................................... 3
BATTERY REPLACEMENT ............................................. 3
/ www.osakasolutions.com
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Osaka M1

  • Page 1: Table Of Contents

    OSAKA SOLUTIONS and its legal representatives do not assume any responsibility for damages to people, property, or animals resulting from improper handling, misuse, incorrect use, or, in any case, non-compliance with the characteristics of the B4U.
  • Page 2: Descripción General

    3.5 STOP OPERATION will be automatically uploaded. Then you can click the “Logger M1 supports two stop modes (stop when reaches the max. Setting” button to enter the parameter configuration interface record capacity, manual stop), and the specific stop mode is and configure the parameters according to specific application.
  • Page 3: Viewing Operation

    3) During the Termologger USB is connected with the computer, Termologger USB without battery power supply. the M1 is generating a PDF report depending on the configuration: – LCD DISPLAY NOTICE...
  • Page 4: Appendix 1 - Working Status Description

    Both upper and lower limit 5 MARK success. occurs 6 MARK failure. 7 Device stop In the middle of the first line, static display. 8 USB connection. Osaka Solutions S.L - TERMOLOGGER USB - User Manual - 4 - comercial1@osakasolutions.es / www.osakasolutions.com...
  • Page 5: Appendix 3 - Lcd

    Page 11 Lower limit 1 Page 12 Setting temperature of lower limit 1 Page 13 Lower limit 2 Page 14 Setting temperature of lower limit 2 Osaka Solutions S.L - TERMOLOGGER USB - User Manual - 5 - comercial1@osakasolutions.es / www.osakasolutions.com...

Table of Contents