Advertisement
Notes on Operation
`
z
2
7
Input signal (1-8) to be output is
selected by the INPUT SELECTOR can be output,
selected with this knob.
<NOTE>
1
8
Use this only for output of S/P DIF signals.
If A-dat OPTICAL signal is output from this connector, operation of the connected
external equipment might be unstable.
8. Output connectors 3-7 [OUTPUT 3-7]
The OPTICAL output connectors from which S/P DIF or A-
dat OPTICAL signals selected be the INPUT SELECTOR can be
output.
@) UT
8
____ This indicates the connector name to
which the signal is output.
2. Input connector 8 [IN 8]
The OPTICAL input connector on the front panel.
9. DC IN connector [DC IN 12V]
The AC adaptor included in the DP-8 package is connected
here.
Plug this AC adaptor cable into
the DP-8 DC IN connector and
plug the adaptor into the AC
wall socket.
3. Output connector 8 [OUT 8]
to the DP-8.
the wall AC socket.
Advertisement
