Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
GRANITE KITCHEN SINKS DUAL MOUNT:
DROP-IN or UNDERMOUNT
Models:
Arona
• 1600-XXX-0120
Baveno Lux
• 1616-XXX-0126
• 1616-XXX-0126HP
• 1618-XXX-0126
• 1618-XXX-0126HP
*HP = kit version
Campino
• 1602-XXX-0126
• 1604-XXX-0126
• 1606-XXX-0126
• 1608-XXX-0126
*
• 1634-XXX-0126
*
Page 1 of 5
Levanzo
• 1635-XXX-0120
www.bocchiusa.com
EN
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BOCCHI Arona 1600 0120 Series
Summary of Contents for BOCCHI Arona 1600 0120 Series
- Page 1 INSTALLATION INSTRUCTIONS GRANITE KITCHEN SINKS DUAL MOUNT: DROP-IN or UNDERMOUNT Models: Campino Levanzo Arona • 1602-XXX-0126 • 1635-XXX-0120 • 1600-XXX-0120 • 1604-XXX-0126 Baveno Lux • 1606-XXX-0126 • 1616-XXX-0126 • 1608-XXX-0126 • 1616-XXX-0126HP • 1634-XXX-0126 • 1618-XXX-0126 • 1618-XXX-0126HP *HP = kit version www.bocchiusa.com Page 1 of 5...
-
Page 2: Before You Begin
• If replacing a sink, measure the old sink and make sure the new BOCCHI sink will cover the cutout of the old sink. • Check that the water supply lines and drain lines are in good shape and quality for the new sink and faucet installation. -
Page 3: Installation
Undermount Installation: BOCCHI recommends a “Flush” installation. Flush Negative Positive Installation Installation Installation “Negative” and “Positive” installations are possible if preferred; however, it is important to consider the faucet 1/4” hole placement when choosing your installation method as the hole is in a fixed position on the sink. - Page 4 13. If drilling extra holes, carefully place the sink upside down on a suitable and stable surface. Use a 1-3/8” diamond hole saw to drill in the pre-scored area(s) where extra holes are needed. 14. Apply silicone sealant to the sink ledge and set it into place on the underside of the countertop.
- Page 5 Drop-In Installations: Installation: 1. Cut along the appropriate line for your sink and installation. NOTE: Keep the inside of the template. 2. Place the template on the countertop and fix it in place using the painter’s tape. 3. Trace the template with a pencil or marker to draw the mark where the sink will be set.
- Page 6 15. Apply silicone sealant to the underside of the sink ledge, or to the outline of the hole on the countertop, where the sink and countertop will meet. 16. Set the sink in place by carefully dropping it into the Claw grip the braket should swing to the countertop.
Need help?
Do you have a question about the Arona 1600 0120 Series and is the answer not in the manual?
Questions and answers