Advertisement
care and maintenance
Cleaning the sponge filter
1
Remove the dust container and take out the foam filter. Wash with
water and drain the water after cleaning. Let it set in a
well-ventilated place for at least 24 hours and place it back under
the dust container. Replace when needed.
Filter(HEPA) Clean
Remove the dust container and lift up the HEPA filter. Wash with
water. Do not scrub, it will damage the Hepa. Drain the water as
much as possible without squeezing. Once dry, place back into the
vacuum with the honeycomb design facing up
The spong filter should be cleaned with cold water at least every other month.
2
2
10
3
3
Advertisement
