content Safety Information ..............01-02 Package List ................. Preparation................04-05 Get Started ................06-08 Care and Maintenance ............09-10 Storage ..................11-12 Specifications................. 12...
safety information General Warning This product is only for household use, not for commercial or industrial use, do not use outdoors or in humid areas; Never let children use the product without proper supervision; Use it in a safe environment and under the instructions and supervision of a person who understands the safe use of the product and its hazards;...
Page 4
safety information Cautions Do not operate or unplug the power cord with wet hands,to avoid malfunction and electric shock; Do not suck smoke or other highly flammable things; Do not use it in places with flammable liquids or combustibles. It may cause fire or explosion;...
preparation Hose installation Align the port, then insert the hose until it locks. Accessory installation Connect the attachments by aligning and twisting to keep the attachment locked in place. Some attachments may have sharp objects, please use caution.
Page 7
preparation Remove the dust container Hold the handle firmly, press the release button with your thumb, lift up and away. Check before use HEPA Filter Foam Filter Remove the dust container, check if the proper filters are installed. Foam filter should be attached to the dust container. HEPA filter on the machine.
getting started Dust container placement Align with the groove of the machine and press down, there will be a click to notify that it has been installed correctly. Start the machine Using the Power button, turn on the vacuum. The “+” and the “-” buttons change the intensity of the vacuum.
Page 9
getting started Use for the Electric Clippers Power button separate Charging port for the clippers underneath rubber cap Attachments Primary Use Other Functions (Crevice Tool) (Brush Attachment) Clean the gaps and corners Used to gather dust and dirt Push and lock button to use, (Deshedder) release to vacuum the hair for the undercoat...
Page 10
getting started In-Depth Uses Deshedding Brush can remove loose hair for longer and shorter coats. It quickly reduces shedding by up to 95% Use only once a week or two to avoid irritation and injury to your pet. Use as needed and DO NOT brush hard. Slicker Brush can clean the loose, floating hair and any debris in the hair.
care and maintenance Clean the Dust Container Place the Dust Container over the dustbin. Release the latch that is holding the bottom of the container to dispose collected hair and dirt. Electric clipper blade care emove the metal clippers and the cover, clean any debris on the blade and inside the attachment.
Page 12
care and maintenance Cleaning the sponge filter Remove the dust container and take out the foam filter. Wash with water and drain the water after cleaning. Let it set in a well-ventilated place for at least 24 hours and place it back under the dust container.
storage Storage The hose can attach to the side of the vacuum using the notches to hold it in place. For easier use, there is another attachment to place the hose and other attachments would fit. Use the notches to clip the holder in place and have any attachment placedfor quick use.
storage Strap Fasteners to hold the cable tied. specifications 100-120V/220-240V~ Rated Voltage 400W Rated Power 2.8kg N.W. 245*180*300mm Product Size ABS/SS/PP Material Vacuum Type 3.2L Dust Cup Capacity 1.45m Hose Length 2.6m Wire Length 60-76dB Noise Level...