Omron HEM-907-STAND Assembly Instructions

1. Failure to assemble and/or use as directed may result in
injury, and will void the user warranty.
2. Choose a level surface for assembling and using this
stand.
3. Follow each step in the sequence. Do not skip ahead.
• Using firm pressure, insert the pole assembly (#3) into the center of the base (#9) assembly.
• On the bottom side of the base place the large washer (#10) on the bottom of the base followed by the lock
washer (#11). Use the bolt (#12) to secure these parts into place by turning the bolt clock-wise using the supplied
flat wrench.
• Insert the platform (#1) on top of the pole
assembly. Install screw (#4) and washer (#5)
and tighten it securely using the supplied Allen
wrench. Tighten the two screws (#7) loosely until
both screws touch the pole. Once the screws are
touching the pole use the supplied Allen wrench to
tighten.
• Attach the basket (#2) to the platform using the sut
under the platform.
• Use screws (#8) to attach the instrument to the
stand. Please review the instrument instructions
prior to installation
Item
1 Platform
2 Basket
3 Pole Assembly
4 Screw-Medium
5 Washer-Lock
6 Nut
7 Screw-Short
8 Screw-Long
9 Base W/Wheels
10 Washer-Large
11 Washer-Lock
12 Bolt
HEM-907-STAND
ASSEMBLY INSTRUCTIONS
Description
WARNING
4. Make sure all fasteners are secure.
5. Prior to use, test and inspect the stand to ensure smooth
operation.
6. Refer to additional warning notices and information
posted on the equipment.
Qty
1
1
1
3
1
2
2
2
9
1
1
1
1
4
1
5
7
8
6
3
10
11
12
2
4