Advertisement
PM-200B REAR PANEL PARTS 8 OPERATION
e
9
ө
e
-
ооо
Power Switch
Pick the ON position which affords the lower hum
level. (except European and Australian models)
о
оо
Ф
input. Selectors
Use
the
selector
to
match
that
channel's
input
sensitivity to the output
of the microphone
con-
nected to it.
Input Jacks
These jacks are telephone type connectors for low
impedance microphones.
Power Cord
Fuse
Replace
with
a fuse of the same
value.
AC
Outlet
(not provided
in certain
areas)
Reverb
Foot Switch Jack
Use this jack to connect
an optional foot switch
for quick-action
reverb and echo on/off control in
any setting.
Echo Jacks (To Echo, From Echo)
These are the most practical jacks when connecting
to an
echo
unit.
Connect
the To
Echo
(level:
—30dBm)
to the echo unit input, and connect the
echo.
unit output to the From
Echo
jack (level:
—20dBm).
Out Jacks
These. are the output jacks for sending the mixed
signal to PA type power amp/speaker.
They have
a two-way
(—6dBm,
+4dBm)
switch to adjust the
output
level.
Line Out Jack and
Socket
These
are of course
useful for recording a mixed
signal, but they can also be used when the PM-200B
serves as a sub-unit connected to another mixer.
Advertisement
