Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nitrox OR600
Summary of Contents for Nitrox OR600
- Page 1 OR600 OR2000 USER MANUAL...
-
Page 2: Table Of Contents
CONTENTS 1. The Main Parts & Technical Specifications 1.1 The Main Parts OR600/OR2000 1.2 Technical Specifications OR600/OR2000 2. Important Safety Instructions 3. Operational Instructions 3.1 First Assembling 3.2 Folding/Unfolding 3.3 Display 3.4 Riding Operations Instructions USER MANUAL 01-24 3.4.1 Before Riding 3.4.2 Riding... -
Page 3: The Main Parts & Technical Specifications
THE MAIN PARTS & TECHNICAL SPECIFICATIONS 1.1 The Main Parts OR600/OR2000 LCD display Lever lock for handlebar height adjustment Handlebar sleeve Brake wire Brake handle Throttle Front suspension Front light Front mudguard 10. Front air tyre Front disc brake (hydraulic on OR2000 ) 12. -
Page 4: Technical Specifications Or600/Or2000
Vibrations: 1.2 Technical Speci ications OR600/OR2000 • The vibration value exposed to the hand-arm system is Model 2.5 m/s2. OR600 OR2000 • Measurement uncertainty 0.5 m/s2. The vibration can Max Load 120Kg be altered due to the rough terrain where the scooter is Max Speed 20Km/h limited circulated. However, this alteration will not depend on the Gradeability 20° scooter. Max Range 40-55Km 70-85Km Frame Aluminum alloy Airborne noise: Tyre size 10 in. • The A-weighted emission sound pressure level is 35 db Tyre type Air tyre Front & rear Front & rear... -
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Do not try to ride over a gap of more than 3 cm. This may cause injury to the rider or damage the vehicle. • Nitrox electric scooter is a personal transportation vehicle • When riding on the rough or bumpy road, please slow down the electric scooter or stop riding the vehicle. and is designed for one person only. Please do not transport • A user must adjust the height of the handlebar tube a passenger on this electric scooter. • Nitrox electric scooter is designed for adults only. People according to their height to ensure a safe, stable and comfortable ride. under the age of 16 cannot use this vehicle. Children should • Do not ride Nitrox electric scooter on slippery surfaces such not use the vehicle or play with it. as oil or ice. • This appliance can be used by children aged from 16 years • Do not use Nitrox electric scooter in the weather conditions and above and persons with reduced physical, sensory or with the temperature below -5. -
Page 6: Operational Instructions
OPERATIONAL INSTRUCTIONS Instructions regarding installation and assembly, aimed at reducing noise and vibrations: 3.1 First assembling Before using the equipment, tighten all the fastening screws of the screen with the accelerator and the brake lever, making sure that these components are fixed and do not move, to avoid vibrations. To prevent the handlebar vibrations and shaking adjust and, if necessary, loosen the screws inside the handlebar sleeves when folded. Before using the equipment, make sure that there are no loose cables on the rear wheel and motor part, to avoid high noise from the motor. Every 2 months it is recommended to check and tighten the nuts on the rear wheel of the motor, to avoid vibrations and 3.2 Folding/Unfolding high noise from the motor. -
Page 7: Display
Home Screen 3.3 Display 1. Error code display 2. Power gear display 3. Speed Display 4. Cruise 5. Battery display 6. Starting mode 7. Single/dual drive riding 8. Lighting 9. 6km/h boost mode 10. Multifunctional display... - Page 8 Home screen description Introduction to key functions Battery display: Button Operation Function From bottom to top, the battery level increases Press and hold 1. Turn on/off dual drive sequentially, the lowermost display grid represents low for 3 seconds mode. (Only works for electric battery, and the uppermost display grid represents high scooters with two motors.) battery. The left side displays the corresponding remaining Short press 1. In the main interface, increase battery percentage. the gear. Press and hold 1. In the main interface, start the Multifunctional display area: for 3 seconds push function (need to be in 1-3 Display total mileage, single mileage, real-time voltage gears, cancel when braking). display, running time prompt, fault prompt and switch Short press 1.
- Page 9 Function menu settings switch to P09: press or to 0. Press and for 3S to enter the setting interface or return to the main interface. Short press to switch Note: The system default is 1 (non zero startups). After setting options. After setting, long press and to startup, it defaults to gear 0. In order to ride safely, please return to the main interface. confirm to start in gear 1. Then press down the acceleration handle while sliding with your feet to start riding.
- Page 10 ODO: To clear ODO Error Definition In the ODO parameter setting interface, briefly press the Code button and then press and hold for 5-6 seconds until the ERRO 1 Rear motor hall sensor malfunction number is zero. ERRO 2 Accelerator throttle malfunction Error Codes The number corresponding to the multi-function area ERRO 3 Rear drive controller malfunction represents the corresponding fault content. The specific ERRO 4 Brake malfunction status is as follows: ERRO 5 Controller under voltage malfunction Communication malfunction (Display ERRO 6 unable to receive controller data) Communication malfunction (Controller ERRO 7 unable to receive display data) Rear drive stall protection (Rear drive ERRO 8 blocking protection) ERRO 9 Temperature protection ERRO 11 Front motor hall sensor malfunction...
-
Page 11: Riding Operations Instructions
3.4 Riding Operations Instructions 3.4.3 Braking • Use the rear brakes handle for braking under normal 3.4.1 Before Riding circumstances. Use front brake handle for braking in • Choose a suitable venue for riding. emergency situations. • Unfold the electric scooter according to the instructions. • The greater pressure you put, the greater braking force • Adjust the height of the handlebar tube according to will be applied. Be aware that hard braking may result in an accident due to slipping of the wheels, loss of balance your height. and fall of the vehicle. Hard braking might also cause 3.4.2 Riding damage to the tyre. • Press the power button to turn on the power. The speed is set by default to gear level 1. • For safety purposes, Joyor electric scooter has a safe start design which means the motor can start only when the speed of the vehicle is above 0. It prevents motor start when the acceleration handle is pressed by mistake. To start the riding operations, put one foot on the standing board and the other foot on the ground and kick scoot it like a classic kick scooter. When the scooter is in motion and its speed is above 0, smoothly use the acceleration handle to start the motor. Once the motor starts, put the other foot on the standing board and continue riding. -
Page 12: Maintenance
4.2 Battery immediately. 4.3 Charger • Nitrox electric scooter is equipped with a lithium polymer battery. The average lifespan of the battery is Chargers: 1000 cycles. Under normal use and maintenance, the 54.6V (OR600), 67.2V (OR2000) battery lifespan can generally reach more than 1000 cycles. • Before using the scooter for the first time, please charge • 54.6V: Input 100-240V ~, 2.8A (MAX) 50 / 60Hz; Output the battery to the full charge. 54.6V = 2.0A; • Avoid totally depleting your scooter’s battery before charging. Always make sure it is minimum 10 % charged. • 67.2V: Input 100-240V ~, 2.8A (MAX) 50 / 60Hz; Output For satisfactory vehicle performance, the battery has to 67.2V = 2.0A; be charged minimum 50 %. -
Page 13: General Recommendations
WARRANTY POLICY The dedicated charger provided by Nitrox has a charging protection timing function. 5.1 Warranty Scope WARNING: For the purposes of recharging the battery, only • This limited warranty covers any defects in the new Joyor use the detachable supply unit provided with this appliance devices accompanied by this limited warranty statement for a period of 24 months after the first retail purchase for Charging instructions the electric parts (display, controller, motor and charger) against manufacturing defects on a replacement basis, • Open the charging port cover on the electric scooter and and a 12 months or 2000km warranty for the battery insert the charger output connector into the charging (whichever comes first) under normal installation, use, port. service and maintenance. • Insert the charger input power plug into the power • Only consumers purchasing this device from an socket (AC110V-220V). authorized Joyor retailer or reseller may obtain coverage • Charger light is red to indicate that charging is in under this limited warranty. -
Page 14: Warranty Application Process
• Nitrox does not cover the cost of national/ international warranty shipping at any time. • This limited warranty is valid with the original receipt of purchase from the authorized dealer. • Excludes consumable wearing fittings. • Excludes parts with physical damages, incomplete/ broken cable connections. • Excludes misuse, modification, negligence and use of the scooter in wet conditions. • Excludes professional and hire use. 5.3 Warranty Application Process • Nitrox will not provide any warranty coverage unless your claim it in compliance with all terms of this limited warranty statement and you follow the proper return procedure. • To request warranty service, you may contact us . CONTACT US Technical Support Please contact us. - Page 15 Nordbutiker AB Gösvägen 28 76141 Norrtälje 08-522 309 80 info@nordbutiker.se...