Viessmann 4180 Operation Manual page 4

2. Introduction
This lamp produces the light by SMD-LED which is suitable
for the lamp model. Low heat build-up and power input. Nearly
unlimited lifetime of the LED, so no more exchange is required.
3. Mounting
- Remove the LED model carefully from the package.
- Check function before mounting.
- Place the attachment light on the chosen position at the mast
(fig. 1).
- Bend the mounting straps by 90° and clamp them around the
two front edges of the mast. (fig. 2).
- Now bend the straps to the inside of the mast (fig. 3). The
light is now fastened and you can thread the connection
cables through the mast.
4. Connection
Caution:
Resistor and diode at the cables are needed for proper
function of the lamp. Never cut them off (fig. 4)! Never cover
resistor or diode with insulation material, because they have
to be cooled by surrounding air!
While connecting the cables, leave a loop of about 2 – 3 cm
length below the attachment light for tower masts, so that you
can pull and reverse the LED model from the mounting hole for
any kind of work.
Connect the attachment light for tower masts to the light output of
a model train transformer (e. g. item 5200) as shown in fig. 4 or 5.
DC voltage: Connect the diode (red part with black marking)
with the positive pole and the resistor with the negative pole of
the power supply.
AC voltage: Operation with AC voltage could cause some flick-
ering. We recommend to use the Viessmann power module, item
5215 (fig. 5) which is sufficient for ca. 100 LEDs or reflectors.
Connect the cable with the diode to the brown output socket and
the cable with the resistor to the yellow output socket.
5. Warranty
Each model is tested as to its full functionality prior to delivery.
The warranty period is 2 years starting on the date of purchase.
Should a fault occur during this period please contact our service
department (service@viessmann-modell.com). Please send
the item to the Viessmann service department for check and
repair only after consultation. If we find a material or production
fault to be the cause of the failure the item will be repaired free
of charge or replaced. Expressively excluded from any warranty
claims and liability are damages of the item and consequen-
tial damages due to inappropriate handling, disregarding the
instructions of this manual, inappropriate use of the model,
unauthorized disassembling, construction modifications and
use of force, overheating and similar.
6. Technical data
Operating voltage:
Operating current:
FR
Änderungen vorbehalten. Keine Haftung für Druckfehler und Irrtümer.
Die aktuelle Version der Anleitung finden Sie auf der Viessmann Homepage
unter der Artikelnummer.
Subject to change without prior notice. No liability for mistakes and printing
errors.
You will find the latest version of the manual on the Viessmann website using
the item number.
4
(with and without item 5215 power module)
Entsorgen Sie dieses Produkt nicht über den (unsortierten)
Hausmüll, sondern führen Sie es der Wiederverwertung zu.
Do not dispose of this product through (unsorted) domestic
waste, supply it to recycling instead.
Viessmann
Bahnhofstraße 2a
D - 35116 Hatzfeld-Reddighausen
info@viessmann-modell.com
+49 6452 9340-0
www.viessmann-modell.de
13 – 24 V digital signal
FR
Cet modéle
se recycle
Modelltechnik GmbH
10 – 16 V AC ~
14 – 24 V DC =
ca. 10 mA
À DÉPOSER
EN MAGASIN
Points de collecte sur www.quefairedemesdechets.fr
Made in Europe
Stand 11/sw
À DÉPOSER
EN DÉCHÈTERIE
OU
98892
01/2024
Ho/Kf