Table of Contents
Advertisement
Last GPRS service
Displays the number of bytes transmitted during the
last GPRS service.
All calls' duration
•
timer: To view the total duration of all
Outgoing call
dialed calls.
•
timer: To view the total duration of all
Incoming call
received calls.
•
Reset
Timers: To clear the timers and reset timer.
Show call cost (network-dependent)
You can choose to activate or deactivate this function.
If the function is activated, both the duration and call
cost will be displayed on the screen. It is set to "Off"
by default.
You need a PIN2 code provided by the network
operator in order to use this function.
Accum. Charges (network-dependent)
This service is available only when the SIM card
contains cost information. The function allows you to
set and view various information on a call's cost.
You can perform the following operations:
•
Show
cost: To show the total costs for dialed and
received calls since the last time the timer was cleared.
Menu Options
•
counter: To reset the counter's reading
Reset charge
to zero (protected by PIN2 code).
•
balance: To show account balance available
Show
for calls.
•
Show
limit: To show the preset maximum limit of
call costs.
•
limit: To cancel the limit on call costs
Cancel
(protected by the PIN2 code).
•
Set
limit: Allows you to set the maximum limit of
call costs (protected by the PIN2 code).
If call costs exceed the maximum limit, you will not be
able to make a call and you will be prompted with
cost". If this happens, all in-progress charged calls
call
will be automatically disconnected.
Call Tariff (network-dependent)
You can view and change the unit rate. The unit rate is
in the decimal system and stored in the SIM card.
•
Display
rate: To show the current set rates.
•
rate: This function is PIN2 protected and will
Reset
reset the rates to the default value "1" upon confirmation.
•
rate: Allows you to change the unit rate after
Set
entering PIN2 code.
"No
35
Advertisement
Table of Contents
