Table of Contents
Advertisement
Screen saver
Allows you to set the Screen saver
On, it will run a slide show in idle mode, by using the
jpeg file(s) you have stored in your phone and
selected.
Settings the Screen saver Off automatically activates
the Economy mode, i.e., the current time displayed on
a white background. This mode increases the
autonomy of your phone (increases your battery life).
1.
When setting the Screen saver On, select a
picture in the list that appears by pressing < or
> (you deselect it also by pressing these keys),
then press - to move to the next picture.
2. Once you selected the pictures of your choice,
press , to activate the screen saver.
You must select several pictures (up to 10) in order to
display a slide show. When selecting only one picture
to be used as a screen saver, only this picture will be
displayed.
and press + or - to choose
3. Select
Start delay
a value. When in idle mode, the screen saver will
start according to the time limit you have set.
Settings
On
or Off. When
4. Then select the
Display period
timing you have set will be applied between each
picture of the slideshow.
Backlight
Backlight is activated when receiving incoming calls
or messages, browsing menus, etc. Select one of the
available values.
Backlight intensity
Allows you to choose from different levels of backlight
intensity.
Network
Contact your phone operator to have full
information about GPRS availability over its
network and for an appropriate subscription.
You might also need to configure your phone with the
GPRS settings supplied by your operator, by using the
menus described in this section. Then select the bearer
(GSM or GPRS) in the menus of each application to
be used (e.g. WAP, MMS, e-mail, etc.).
Access settings
This menu allows you to create different data profiles
that can be used for connecting to various services: for
example, when using WAP or when sending MMS,
and press ,. The
43
Advertisement
Table of Contents
