Table of Contents
Advertisement
Login,
Please refer to the previous section for information.
APN
connect to, a text string or IP address (e.g., wap.operatorname.fr) used to
establish the connection with your WAP Service Provider (ISP). Select
and press
L
Gateway
Allows you to enter or change the IP address and port number (subscription
dependent) for the gateway: select Gateway and press
Gateway
Address and press
Homepage
Allows you to enter the WAP address of the homepage, the first page displayed
when accessing the WAP services. Select
Homepage
the URL address of the homepage (e.g. www.philips.com) and press
L
Bearer
Allows you to select the type of network used when launching a WAP session
and gives you access to the following items:
Bearer
When selecting
network for WAP connections. When selecting
connect to the GPRS network, then to the GSM network if the GPRS one isn't
available when launching WAP.
74
-
Login
Password
and
Inactivity time
allows you to enter the address of the external data network you want to
,
, then enter the approriate address and press
Error messages during WAP connections are mainly due to incorrect parameters:
you should contact your operator before first use, in order to have the
appropriate WAP and GPRS parameters. With some operators, WAP access
parameters can be set remotely. Please check directly by your operator.
,
.
This feature is network-dependent: if the operator's gateway gives an URL, it will
have priority on the Homepage URL you defined.
GSM
GSM
or GPRS, your mobile will only use the GSM or GPRS
-
Password
APN
are the same fields as for GSM settings.
Homepage
-
-
GPRS
-
Inactivity time
,
.
,
, then enter the IP
,
and press
. Then enter
,
GPRS first
GPRS
first, it will first try to
WAP services
APN
.
Advertisement
Table of Contents
