Philips HD9200/90R1 User Manual page 9

Tip
• During cooking, if you need to change the cooking temperature or time, turn the
control knobs to the required setting.
Note
• Some ingredients require shaking or turning halfway through the cooking time
(see 'Food table'). To shake the ingredients, pull out the pan with the basket, place
it on a heat resistant work top, slide the lid and press the basket release button to
remove the basket and shake the basket over the sink (Fig. 9). Then put the basket
into the pan, and slide them back into the appliance.
• If you set the timer to the half of the cooking time and you hear the timer bell it is
time to shake or turn the ingredients. Be sure to reset the timer to the remaining
cooking time.
7 When you hear the timer bell, the cooking time has elapsed. (Fig. 10)
Note
• You can also switch off the appliance manually. To do this, turn the timer knob to 0
(counterclockwise); this requires some more force than turning clockwise.
8 Pull out the pan and check if the ingredients are ready. (Fig. 11)
Caution
• The Airfryer pan is hot after the cooking process. Always place it on a heat
resistant work top (eg. trivet, etc.) when you remove the pan from the device.
Note
• If the ingredients are not ready yet, simply slide the pan back into the Airfryer by
the handle and add a few extra minutes.
9 To remove small ingredients (e.g. fries), lift the basket out of the pan by sliding the
lid first, and then pressing the basket release button. (Fig. 12)
Caution
• After the cooking process, the pan, the basket, the interior housing and the
ingredients are hot. Depending on the type of ingredients in the Airfryer,
steam may escape from the pan.
10 Empty the basket contents into a bowl or onto a plate. Always remove the basket
from the pan to empty contents as hot oil may be in the bottom of the pan. (Fig. 13)
ENGLISH
11