Related Manuals for Diamond Tech Diamond Laser 7000
Summary of Contents for Diamond Tech Diamond Laser 7000
- Page 1 DIAMOND TECH Innovations For Creativity DL 7000 DL 7000 DIAMOND LASER BAND SAW DIAMOND LASER BAND SAW OPERATIONS MANUAL OPERATIONS MANUAL...
-
Page 2: Before You Begin
Do not operate while under the of medication or alcohol. • To ensure top performance keep band saw properly maintained. Contents Your Diamond Laser 7000 has been shipped partially assembled. ™ Carefully remove saw and parts from the packaging. 1-Band Saw Body... - Page 3 PAGE 2 - DL7000 INSTRUCTION MANUAL Assembly Instructions A. Table Installation Fig.1 Remove all three table mounting set screws from the table mounting block (Fig. 1). Loosen and remove the table alignment screw and wingnut located on the front of the cutting table blade slot (Fig.
- Page 4 DL7000 INSTRUCTION MANUAL - PAGE 3 Band Saw Use and Maintenance Fig.6 A. Blade Tension The blade should be tight enough so the blade moves slightly on curved cuts, and not at all for straight cuts. WARNING: If the diamond blade is too During operation, the blade may begin to expand due to friction and heat.
- Page 5 NOTE: Blade should not touch thrust bearing until pressure is applied to material being cut. F. Replacing Blade Guides Replacing blade guides is necessary after considerable wear. All Diamond Tech’s Fig.13 Replacement Guides can be purchased wherever Diamond Tech products are sold or by calling 800-937-9593.
-
Page 6: Troubleshooting Guide
DL7000 INSTRUCTION MANUAL - PAGE 5 Trouble Shooting Guide Problem: A small amount of surface rust has appeared on some of the steel parts. Solution: This rust is removable with light machine oil, WD40 or naval jelly. Rust will not effect the function or life of the saw. -
Page 7: Tips On Using Your Band Saw
P777 Blade Repair Service Diamond Tech offers a blade repair service should a blade break with ample diamond remaining. Return blade, indicating saw model and payment to: Diamond Tech, Blade Repair Service, 5600 Airport Blvd. Suite C,Tampa, FL 33634. For International and special handling, please include extra postage and shipping instructions. - Page 8 Diamond Laser 7000 Band Saw is warranted to the original purchaser for one full year from the original purchase date. During the one year period, if you feel the Diamond Laser 7000 Band Saw is not performing properly and needs to be serviced, contact Diamond Tech at 800-937-9593 or email info@dticrafts.com for a Return Authorization Number.