Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Evident iPLEX TXII
Summary of Contents for Evident iPLEX TXII
- Page 1 TXII Brief Operating Manual [Pages 2 to 8] Basic usage [Pages 9 to 13] Storage and optional items [Pages 14 to 17] Precautions for use and specification MM4888 01 * Please make sure to read the included “Operating Manual” before using this product.
-
Page 2: Product Components
Product components Control unit Rigid scope unit Flexible scope unit To be connected via USB cables Tablet * For information on how to connect the scope units, please see page 3. - Page 3 How to assemble Connecting the scope units/connecting the cables the components 1. Align the scope unit with the control unit and 3. Connect the cable from the control unit to the tablet. apply clamping rings. 2. Tighten the clamping ring to fix the scope unit.
-
Page 4: Preparing For Operation
Preparing for Downloading/activating the software operation 1. Download the .zip file containing the TXII 3. Activate the application program. software from the download site below and Enter the key code to activate the software. (Activation decompress it. is only required when you establish a connection with https://www.olympus-ims.com/service-and-support/downloads/ the control unit for the first time.) 2. - Page 5 How to make How to make observations/operating the flexible scope unit (angle lever) observations How to make observations How to operate the flexible scope unit (angle lever) 1. While watching the live image, insert the insertion While performing a bending operation, observe the area of interest section into the object under test and then observe the area of interest.
-
Page 6: Operations And Functions
Operations and Remote Control mode functions Control unit, buttons In Remote Control mode, you can perform operations using the buttons on the control unit. Button Function Cross-hair key [U] Briefly press Increases intensity to the next higher level. Cross-hair key [L] Briefly press Decreases the quantity of light to the next lower level. - Page 7 Operations and GUI mode functions In GUI mode, operations can be performed via the touch panel of the tablet or a mouse. (For some operations, buttons on the control unit are also used.) Application screen * The selected field is highlighted in yellow. Menu buttons Function Changes a zoom factor to another.
- Page 8 Operations and GUI mode functions Control unit, buttons In GUI mode, only the following buttons work. Button Function Cross-hair key [U] Briefly press Moves the cursor up Cross-hair key [L] Briefly press Moves the cursor to the left Cross-hair key [R] Briefly press Moves the cursor to the right Cross-hair key [D]...
- Page 9 How to store Placing the components in the carrying case the components Placing the tablet in the carrying case Placing the flexible scope unit Placing the rigid scope unit Pull the belt out of the bottom of the tablet, The components should be placed in the For storage, wind the cable attached to the and then affix the hook surface to the loop carrying case with the logos facing the front.
- Page 10 How to assemble Attaching and removing the protection braid the components Removing the protection braid Attaching the protection braid to the flexible scope from the flexible scope 2. Once the entire length of the 1. With the insertion section of the 1.
- Page 11 How to assemble Attaching and removing the protection sleeve the components Removing the protection sleeve Removing the protection sleeve from the rigid scope from the rigid scope 1. Remove the clamping ring by rotating 1. Remove the bending-proof device 2. Attach the protection sleeve to the it counterclockwise.
- Page 12 How to assemble Attaching and removing the grip extender the components Removing the grip extender Attaching the grip extender to the rigid scope from the rigid scope 1. Remove the bending-proof device 2. Attach the grid extender to the rigid 1.
- Page 13 How to assemble How to use the protection box the components 1. Open the lid of the protection box and then place the 3. Combine the gasket with the gasket stopper. tablet on the tablet stand. Do not align the gaps Gasket Gasket stopper 2.
-
Page 14: Precautions For Use
The Operating Manual contains safety-related instructions. Please make sure to read them before using this product. Precautions for During use - Do not push in the insertion section with force. Doing so could result in a malfunction - While withdrawing the insertion section from the object under test, do not bend the bending section The distal end of the insertion section includes a lens. -
Page 15: Specification
Specification Hardware Item Specification Item Specification Control unit: IV10200T Protection box: MAJ-2536 Weight 350 g (including cables) Weight 2.2 kg Performs the following operations: video signal output for 400 (W) × 300 (H) × 150 (D) mm displaying live images; gain control; brightness adjustment; External dimensions (not including protrusions) Function... - Page 16 Specification Software Item Specification Applications Image processing Zoom-in/zoom-out Switches between two zoom factors (100% and 200%) Switching between Auto (8 levels) and Manual (12 levels) with the [Gain] button Brightness adjustment Gain and exposure time switching interlocked with brightness control Image-recording function Recording medium Images are recorded to the storage incorporated in the tablet to be used...
- Page 17 Pushing in the scope with force, withdrawing the scope while it is bent, or bending the scope with force could result in malfunction. Avoid doing this. EVIDENT CORPORATION...
Need help?
Do you have a question about the iPLEX TXII and is the answer not in the manual?
Questions and answers