Bobrick B-164 Instructions For Installation

PARTS/TOOLS NEEDED:
PARTS/TOOLS NEEDED:
PARTS/TOOLS NEEDED:
PARTS/TOOLS NEEDED:
Backlit Mirror
Backlit Mirror
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
Read all instructions before using this mirror.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
Backlit Mirror
Backlit Mirror
MIRRORS SHOULD ONLY BE INSTALLED USING THE FOLLOWING INSTRUCTIONS. FAILURE TO
Read all instructions before using this mirror.
FOLLOW THESE INSTRUCTIONS WILL VOID THE WARRANTY.
MIRRORS SHOULD ONLY BE INSTALLED USING THE FOLLOWING INSTRUCTIONS. FAILURE TO
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
FOLLOW THESE INSTRUCTIONS WILL VOID THE WARRANTY.
Read all instructions before using this mirror.
Read all instructions before using this mirror.
• Unplug power before putting on or taking off parts.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
MIRRORS SHOULD ONLY BE INSTALLED USING THE FOLLOWING INSTRUCTIONS. FAILURE TO
MIRRORS SHOULD ONLY BE INSTALLED USING THE FOLLOWING INSTRUCTIONS. FAILURE TO
• Close supervision is necessary when this mirror is used by, or near children, invalids, or disabled persons.
• Unplug power before putting on or taking off parts.
FOLLOW THESE INSTRUCTIONS WILL VOID THE WARRANTY.
FOLLOW THESE INSTRUCTIONS WILL VOID THE WARRANTY.
• Use this mirror only for its intended use as described in these instructions. Do not use attachments not recommended by Bobrick.
• Close supervision is necessary when this mirror is used by, or near children, invalids, or disabled persons.
• Never operate this mirror if it has a damaged cord, if it is not working properly, if it has been dropped or damaged, or dropped
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
• Use this mirror only for its intended use as described in these instructions. Do not use attachments not recommended by Bobrick.
into water. Contact Bobrick for a replacement mirror.
• Never operate this mirror if it has a damaged cord, if it is not working properly, if it has been dropped or damaged, or dropped
• Unplug power before putting on or taking off parts.
• Unplug power before putting on or taking off parts.
• Keep the cord away from heated surfaces.
into water. Contact Bobrick for a replacement mirror.
• Close supervision is necessary when this mirror is used by, or near children, invalids, or disabled persons.
• Close supervision is necessary when this mirror is used by, or near children, invalids, or disabled persons.
• Never drop or insert any object into any opening.
• Keep the cord away from heated surfaces.
• Use this mirror only for its intended use as described in these instructions. Do not use attachments not recommended by Bobrick.
• Use this mirror only for its intended use as described in these instructions. Do not use attachments not recommended by Bobrick.
• Do not use outdoors.
• Never drop or insert any object into any opening.
• Never operate this mirror if it has a damaged cord, if it is not working properly, if it has been dropped or damaged, or dropped
• Never operate this mirror if it has a damaged cord, if it is not working properly, if it has been dropped or damaged, or dropped
• Exposing the mirror edges to liquids may cause a permanent discoloration to the mirror etching that is NOT covered by Bobrick warranty.
• Do not use outdoors.
into water. Contact Bobrick for a replacement mirror.
into water. Contact Bobrick for a replacement mirror.
• WARNING: Risk of electric shock - Connect this mirror to a properly grounded outlet only. See grounding instructions.
• Exposing the mirror edges to liquids may cause a permanent discoloration to the mirror etching that is NOT covered by Bobrick warranty.
• Keep the cord away from heated surfaces.
• Keep the cord away from heated surfaces.
CLEANING INSTRUCTIONS
• WARNING: Risk of electric shock - Connect this mirror to a properly grounded outlet only. See grounding instructions.
• Never drop or insert any object into any opening.
• Never drop or insert any object into any opening.
• Clean mirrors with warm water and a soft, lint free cloth, do not allow liquids to seep under the edges. Don't use abrasive,
CLEANING INSTRUCTIONS
• Do not use outdoors.
• Do not use outdoors.
acid or alkali cleaners or products with ammonia or vinegar.
• Clean mirrors with warm water and a soft, lint free cloth, do not allow liquids to seep under the edges. Don't use abrasive,
• Exposing the mirror edges to liquids may cause a permanent discoloration to the mirror etching that is NOT covered by Bobrick warranty.
• Exposing the mirror edges to liquids may cause a permanent discoloration to the mirror etching that is NOT covered by Bobrick warranty.
• Apply mild cleaners directly to a cloth, do not spray directly on the mirror. Applying liquids directly to the mirror's surface may allow the
acid or alkali cleaners or products with ammonia or vinegar.
• WARNING: Risk of electric shock - Connect this mirror to a properly grounded outlet only. See grounding instructions.
• WARNING: Risk of electric shock - Connect this mirror to a properly grounded outlet only. See grounding instructions.
liquid to seep/wick between the layers on the edge of the mirror. If this occurs there may be a permanent discoloration on the mirror
• Apply mild cleaners directly to a cloth, do not spray directly on the mirror. Applying liquids directly to the mirror's surface may allow the
CLEANING INSTRUCTIONS
etching which is NOT covered by Bobrick warranty.
CLEANING INSTRUCTIONS
liquid to seep/wick between the layers on the edge of the mirror. If this occurs there may be a permanent discoloration on the mirror
• Clean mirrors with warm water and a soft, lint free cloth, do not allow liquids to seep under the edges. Don't use abrasive,
• Dry mirror immediately following cleaning and make sure all joints and edges are dry.
• Clean mirrors with warm water and a soft, lint free cloth, do not allow liquids to seep under the edges. Don't use abrasive,
etching which is NOT covered by Bobrick warranty.
acid or alkali cleaners or products with ammonia or vinegar.
acid or alkali cleaners or products with ammonia or vinegar.
• Dry mirror immediately following cleaning and make sure all joints and edges are dry.
• Apply mild cleaners directly to a cloth, do not spray directly on the mirror. Applying liquids directly to the mirror's surface may allow the
• Apply mild cleaners directly to a cloth, do not spray directly on the mirror. Applying liquids directly to the mirror's surface may allow the
liquid to seep/wick between the layers on the edge of the mirror. If this occurs there may be a permanent discoloration on the mirror
1.
liquid to seep/wick between the layers on the edge of the mirror. If this occurs there may be a permanent discoloration on the mirror
Mark the location of the mounting holes. See individual product
etching which is NOT covered by Bobrick warranty.
etching which is NOT covered by Bobrick warranty.
specifications on page two for mounting hole locations.
1.
Mark the location of the mounting holes. See individual product
• Dry mirror immediately following cleaning and make sure all joints and edges are dry.
• Dry mirror immediately following cleaning and make sure all joints and edges are dry.
specifications on page two for mounting hole locations.
1.
1.
Mark the location of the mounting holes. See individual product
Mark the location of the mounting holes. See individual product
specifications on page two for mounting hole locations.
specifications on page two for mounting hole locations.
ADA requires that "Mirrors shall be mounted with the bottom edge of the
reflecting surface no higher than 40 in (1015mm) above the finished floor 1 ."
ADA requires that "Mirrors shall be mounted with the bottom edge of the
For lit mirrors this means the dimension is to the inner most edge of the lit portion.
reflecting surface no higher than 40 in (1015mm) above the finished floor 1 ."
For lit mirrors this means the dimension is to the inner most edge of the lit portion.
ADA requires that "Mirrors shall be mounted with the bottom edge of the
ADA requires that "Mirrors shall be mounted with the bottom edge of the
reflecting surface no higher than 40 in (1015mm) above the finished floor 1 ."
reflecting surface no higher than 40 in (1015mm) above the finished floor 1 ."
For lit mirrors this means the dimension is to the inner most edge of the lit portion.
For lit mirrors this means the dimension is to the inner most edge of the lit portion.
INSTRUCTIONS FOR INSTALLATION
Backlit Mirror Install Instructions
BOBRICK MODEL B-164 BACKLIT MIRROR
(Part #: 694NE2436-30SO00B & 694NE2442-30SO00B)
Backlit Mirror Install Instructions
(Part #: 694NE2436-30SO00B & 694NE2442-30SO00B)
Backlit Mirror Install Instructions
Backlit Mirror Install Instructions
(Part #: 694NE2436-30SO00B & 694NE2442-30SO00B)
(Part #: 694NE2436-30SO00B & 694NE2442-30SO00B)
Mounting Hardware
Mounting Hardware
Mounting Hardware
Mounting Hardware
PARTS/TOOLS NEEDED:
Finished floor
Finished floor
Finished floor
Finished floor
Finished floor
IMPORTANT SAFETY INSTRUCTIONS - SAVE T
Read all instructions before using this mirror.
MIRRORS SHOULD ONLY BE INSTALLED USIN
FOLLOW THESE INSTRUCTIONS WILL VOID TH
WARNING - To reduce the risk of burns, fire, electric shock, or in
• Unplug power before putting on or taking off parts.
Electric Drill
Electric Drill
Electric Drill
Electric Drill
NO
NO
NO
NO
40"
40"
Backlit Mirror
40"
40"
40"
Wiring Kit
Wiring Kit
Wiring Kit
Wiring Kit
Backlit Mirro
(Part #: 694NE2436-3
YES
YES
YES
YES
40"
40"
Moun
40"
40"
Rev A: 04.27.20
Rev A: 04.27.20