Summary of Contents for TEAL TRIANGLE FREESTANDING SKI RACK
Page 1
INSTALLATION GUIDE F R E E STA N D IN G SK I R ACK Questions or Concerns? Contact us at: support@tealtriangle.com...
Page 2
WARNING! The Freestanding Ski Rack is NOT intended for use by any person under the age any other purpose. of 18 years old. You must be over the age of 18 to install or use the Freestanding Ski Rack. This system has a maximum capacity of 160 lbs. Overloading the system could result in damage WARNING! Strictly follow all instructions to avoid an accident, damage to property, personal to property or injury.
Page 3
INSTALLATION Make the base by fastening the Uprights (A) and Horizontal Supports (D) using four M5x25 (K) buttonhead screws. The correct screws are the medium length buttonscrews. Upright Qty: 2 Ski and Pole Shelf Bottom Shelf Qty: 2 Qty: 1 Horizontal Support Qty: 2 Padded Ski Divider...
Page 4
Fasten the Ski Pole Shelf (E) to the Bottom Support Bracket (F) using eight M4 x Install the Padded Ski Divider (I) using the hardware specified below. Ensure the rubberized foam is facing up. 10mm wood screws (M) using a phillips screwdriver. Ensure the four holes in the Ski Pole Shelf (E) are closest to the outside as seen below.
Page 5
Insert a Thumbscrew Spacer (Q) into the looped end of each Leather Strap (S). Place your skis together with the binding brake intertwined. Loosen the strap and slide the skis carefully over the Padded Ski Divider (I). Wrap the strap around the skis as seen in the image A-A below.