AquaStar PureStar PS10 Operation And Maintenance Manual

OPERATION AND MAINTENANCE
How do I maintain my PureStar system?
To maintain the optimal performance of your AquaStar PureStar system, a few key steps are
important. The system is designed with a self-cleaning ability, reducing the need for frequent
manual cleaning. However, it is advisable to occasionally check the system for any debris or
obstructions that could affect its operation.
For detailed procedures on maintenance tasks like removal, cleaning, and reinstallation, please
refer to the "PureStar Module Installation and Maintenance" section in the user manual. This will
provide you with step-by-step instructions to ensure that your PureStar system stays in excellent
condition.
If you encounter any technical difficulties or have specific questions, AquaStar Technical
Support is available to assist you.
How much space does the PureStar system require?
The AquaStar PureStar system is designed for ease of installation and minimal space
requirement. It only needs 18 inches of horizontal plumbing to integrate into your existing pool
equipment setup. For more precise dimensions and layout configurations, please refer to the
user manual. This makes it a convenient choice for pool owners looking to optimize their
equipment area.
How do I winterize my PureStar system?
If you reside in an area where temperatures drop below freezing, it's crucial to winterize your
PureStar system to prevent freeze damage. Follow these steps:
1. Turn off the power to your pool pump at the circuit breaker.
2. Unplug the PureStar unit from its 120V GFCI protected outlet.
3. Release any built-up pressure in your plumbing by opening the air relief valve on your
filtration system.
4. Loosen the union nuts and carefully remove the PureStar module from its position between
the union fittings.
5. Install the "Blank Tube" in the place of the PureStar unit and tighten the union nuts.
6. Store the removed PureStar unit indoors, away from exposure to harsh winter elements.
7. Proceed with your standard pool winterizing procedures.
OPERATION
Is PureStar suitable for indoor pools?
No, the ozone system must only be installed in outdoor locations or indoor locations with forced
air ventilation in accordance with ASHRAE Standard 62.1 2013.
What kind of water flow rate is optimal for PureStar?
The optimal water flow rate for the AquaStar PureStar system is determined by various factors
such as pool size and pump capacity. However, it is important to note that the PureStar system
has a maximum flow rate of 100 GPM (Gallons Per Minute). The system's variable flow
restrictor adjusts to your system's flow rate to minimize pressure drop and save energy when