Fix the moisture-proof pad
Once the base station is put in place, wipe
the indicated area clean with a dry cloth,
the moisture-proof pad, and stick the map
onto the floor as indicated.
Note:
1. The moisture-proof pad only applies to the
wooden floor.
2. To remove the pad from the floor, please
keep it slow to avoid residual glue.
Add Water
Before mopping, add clean water to the
water tank.
· Open the robot's top cover, remove the
water tank. Fill the water tank with clean
water through the tank opening.
· Close the tank, put it back into the robot,
and place the robot's top cover back.
Push the robot into the base station and
ensure the charging contacts are properly
connected. The base station indicator goes
out and the robot will turn itself on and
broadcast a message.
09