Manual Changes - HP 11710A Operating And Service Manual

MANUAL CHANGES
r- MANUAL IDENTIFICATION -i
DOWN CONVERTER
— Serial Prefix or Number
Make Manual Changes
1
► NEW ITEM
ERRATA
WARNING
NOTE
Printed in U.S.A.
January 16,1978
2 Pages
► Page 3, igure 2:
Add the following after the third sentence:
►Page 1, Table 1:
Under General Characteristics replace Power Requirements with the following:
Power Requirements: 100 or 120 volts (+5%,-10%) from 48 to 440 Hz; or 220 or 240 volts (+5%, -10%)
from 48 to 66 Hz. 25 V-A maximum.
This supplement contains important information for correcting manual errors and for adapting the manual to
instruments containing improvements made after the printing of the manual.
Page 11, Table 3:
A1 Q1. or recommended replacement see Change 1.
To avoid the possibility of hazardous electrical shock, do not
operate this instrument at line voltages greater than 126.5 Vac
with line frequencies greater than 66 z (leakage currents at
these line settings may exceed 3.5 mA).
►Page 2, paragraph 19:
Change the first sentence to read:
The 11710A Down Converter requires a power source with an output of 100 or 120 volts (+5%, — 10%)
from 48 to 440 Hz; or 220 or 240 volts (+5%, -10%) from 48 to 66 Hz single phase.
Model Number: 7 0A
Date Printed: October 1976
Part Number: 11710-90002
_ Serial Prefix or Number Make Manual Changes
►1734A, 1804A
EWLETT PACKARD
To use this supplement:
Make all ERRATA corrections
Make all appropriate serial number related changes indicated in the tables below.
Manual change supplements are revised as often as necessary to keep manuals as current and accurate as possible.
Hewlett-Packard recommends that you periodically request the latest edition of this supplement. ree copies are available
from all HP offices. When requesting copies quote the manual identification information from your supplement, or the model
number and print date from the title page of the manual.