Table of Contents
Advertisement
Parameter
PCI Bus Driver Version
PCI_# ROM
(Note1)
PCI Devices Common Settings
PCI Latency Timer
VGA Palette Snoop
PERR# Generation
SERR# Generation
Above 4G Decoding
SR-IOV Support
Above 4G Decoding
BME DMA Mitigation
PCI Express Settings
PCI Express GEN 2 Settings
(Note1) This section is dependent on the available PCI Slot.
Description
Displays the PCI Bus Driver version information.
When enabled, this setting will initialize the device expansion
ROM for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Value to be programmed into PCI Latency Timer Register.
Options available: 32 PCI Bus Clock, 64 PCI Bus Clock,
96 PCI Bus Clock, 128 PCI Bus Clock, 160 PCI Bus Clock,
192 PCI Bus Clock, 224 PCI Bus Clock, 248 PCI Bus Clock.
Default setting is 32 PCI Bus Clock.
Enables or Disables VGA Palette Registers Snooping.
Options available: Enabled, Disabled.
Default setting is Disabled.
Enables or Disables PCI Device to generate PERR#.
Options available: Enabled, Disabled.
Default setting is Disabled.
Enables or Disables PCI Device to generate SERR#.
Options available: Enabled, Disabled.
Default setting is Disabled.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Enabled, Disabled. Default setting is Enabled.
If the system has SR-IOV capable PCIe devices, this item
Enable/Disable Single Root IO Virtualization Support.
Options available: Enabled, Disabled. Default setting is
Disabled.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Enabled, Disabled. Default setting is Enabled.
Re-enable Bus Master Attributes disabled during PCI
enumeration PCI Bridges after SMM Locked.
Options available: Enabled, Disabled.
Default setting is Disabled.
Press [Enter] to configure advanced items.
Press [Enter] to configure advanced items.
BIOS Setup
- 57 -
Advertisement
Table of Contents
