Advertisement
4.
OPERATION
NO.
FUNCTION
1
ON/OFF Button
(Multifunctional)
2
USC C Input &
Output (PD45W)
3
USB Output
Port 1
4
USB Output
Port 2
5
DC Output Port
6
EC 5 Port
7
BOOST Button
8
LCD Screen
NO.
OPERATION
1
Percentage of battery capacity: percentage of battery
charge/discharge/standby
2
Charging and discharging power display
3
Alarm prompt
4
BOOSTER button: Ready to jump start the vehicle
5
DC output display
6
Type-C charging and discharging display
7
USB output display
8
Output display
9
Input display
CHARGING THE DEVICE
4.2.1. Connect one end of the USB cable to the AC adapter, and the other end to USB C input port to begin charging.
4.2.2. Press the ON/OFF button to start charging. The percentage of battery capacity and power will display.
4.2.3. When the battery is fully charged, the LCD screen will turn off automatically. Full charge can take up to 10 hours.
4.2.4. Unplug the cable when no charge is required.
NOTE: ensure the jump starter is fully charged before first use. The jump starter will power off automatically when no load is detected,
or when charging is complete.
4.1.
POWER BANK
This device can be used as a power bank with compatible devices such as smartphones, tablets or laptops.
4.1.1. Connect the Roadstart to a compatible device.
4.1.2. Press the ON/OFF button to start charging.
4.1.3. Unplug the cable when no charge is required.
4.2.
LED FLASHLIGHT
4.2.1. Long press ON/OFF button for 3 seconds to turn on the light.
4.2.2. Press ON/OFF button to switch between 4 modes: Solid, SOS, Flash and Off.
4.3.
JUMP START
NOTE: this product is for 12V batteries (maximum 10.0L petrol or 8.0L diesel engines).
Check to make sure the battery power of the jump starter is more than 50% before you use it to start your car.
4.3.1.
Insert the plug of the clamp completely into the jump starter.
4.3.2. Connect the red clamp to the positive terminal (+) of the car battery
4.3.3. Connect the black clamp to the negative terminal (-) of the car battery.
4.3.4. Press the ON/OFF button and long press 'BOOST' until the LCD screen displays 'BOOST'.
4.3.5. Start the car.
5.
MAINTENANCE
5.1.
STORAGE
Store the product in a clean, shaded and well-ventilated area.
9
DO NOT place the product in a high-temperature environment.
8
Keep the product away from children and pets.
9
Check the battery level at least once every six months and charge the product in time.
9
5.2.
CLEANING
DO NOT use detergents to clean the product. Clean with a soft cloth.
8
© Jack Sealey Limited
OPERATION
Press to see remaining capacity.
Long press to turn on/off the flashlight.
Fast charge/discharge
Charge your devices (QC 3.0 compatible)
faster, with 75% increase in speed.
Charge your devices (QC 3.0 compatible)
faster, with 75% increase in speed.
Charge other products through a cigarette
lighter.
Insert the plug into the EC5 port to jump
start the car.
Press this button before starting the car.
Charge and discharge status and clamp
startup display
Original Language Version
RS2000
Issue 2 (H)
19/09/23
Advertisement
