Download Print this page

Specifications - Harbor Freight Tools VIKING 59466 Owner's Manual & Safety Instructions

Wheeled battery charger, engine starter and alternator tester

Advertisement

21. Unplug the Battery Charger from its
electrical outlet before connecting its cables
to a battery, or performing any inspection,
maintenance, or cleaning procedures.
22. use this charger with flooded lead-acid batteries
only. When charging a maintenance-free battery,
always monitor the progress of the charge by
viewing the Battery Voltage / % on the Display.
Do not overcharge a maintenance-free battery.
23. Do not attempt to charge non-rechargeable
or defective batteries.
24. Do not charge more than one battery at one time.
25. Have your charger serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of
the charger is maintained.
26. Do not use charger while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating charger
may result in serious personal injury.
Grounding and ac power cord connection instructions
Charger should be grounded to reduce risk of electric
shock. Charger is equipped with an electric cord
having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.

Specifications

Input
Electrical Rating
Charge Rate
Output
Engine Start
59466
SaVe tHeSe inStructiOnS.
120  V AC / 60  H z / 11.5  A Maximum continuous,
50A Maximum intermittent
Charge-2  A : 6/12VDC, 2A.
Charge-15A: 6/12VDC, 15A.
Boost: 6/12VDC, Duty-cycle operation, a cycle is:
50A-120 Seconds, 40A-60 Seconds, 30A-60 Seconds,
20A-60 Seconds, 30A-60 Seconds, 40A-60 Seconds
12V-START, 250A 10 Seconds On, 120 Seconds Off
For technical questions, please call 1-888-866-5797.
27. Before moving charger, disconnect power supply
and battery, then allow charger to cool.
28. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
In addition, people with pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid
electrical shock.
• Properly ground power cord. Ground Fault Circuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
29. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
DanGer – Never alter AC cord or plug provided
– if it will not fit outlet, have proper outlet installed
by a qualified electrician. Improper connection
can result in a risk of an electric shock.
cautiOn – risk of Fire or electric Shock.
Connect battery charger directly to grounding
receptacle (three-prong). An adapter should
not be used with battery charger.
Page 5

Advertisement

loading