Sovos SV-92000P0016 Quick Start Manual

EN
SV-92000P0020
VISOR - Carrier
ISO 16321-1:2022
SV-92000P0023
VISOR - Clips / Adaptors
SV-92000P0016 SV-92000P0016
VISOR - Mesh (FM) VISOR - Clear (FC)
ISO 16321-3:2022 ISO 16321-1:2022
FULL FACE VISORS
Before using the visor, it is essential to carefully read the instructions. Failure to comply with these recommendations may compromise the safety
provided by the visor. Neither the manufacturer nor the distributor can be held responsible for incidents resulting in severe or even fatal injuries due
to improper use of the visor. This visor should be used exclusively for the activities for which it has been certified. It has been CE certified in
accordance with ISO 16321-1:2022 (FC model) and ISO 16321-3:2022 (FM model) for general use with safety helmets in high-altitude, arboricultural,
and industrial work. The visor also complies with the requirements of ANSI Z87.1. It cannot be used on its own but must be combined with S3200
helmet models. This product should not be used in situations other than those for which it was designed (e.g., electrical risk). The visor described in
this manual is a Category II Personal Protective Equipment. As a result, it has undergone an evaluation in accordance with the EU procedure, applying
the requirements of Annexes V and VI of the European Regulation 2016/425.
NOTIFIED BODY : ALIENOR Certification, (NB: 2754), ZA du Sanital, 21 rue Albert Einstein, 86100 Châtellerault, France
DECLARATION OF CONFORMITY: The declaration of conformity can be downloaded from the SOVOS Website www.sovoshelmets.com