ULTRA-V-R Front
1. 5V DC: Power input. Connect supplied 5V power supply to power Sender.
2. SERVICE: USB-Mini connection, used to restore factory defaults via PC GUI.
3. PWR/VID/ACT: Status indicators
1. PWR: This LED indicates power is applied to the unit.
2. VID: This LED is lit when HDMI video is being output.
3. ACT: This LED blinks when HDMI processor is active (normal).
4. HDMI OUT: HDMI local Output.
ULTRA-V-R Back
1. INPUT: CAT6 Input port from ULTRA-V-S Sender.
Hall Technologies
November 22, 2023
Page 9 of 12