ULTRA-V-4S/8S Front
1. 5V DC: Power input. Connect supplied 5V power supply to power Sender.
2. SERVICE: USB-Mini connection, used to restore factory defaults via PC GUI.
3. PWR/VID/ACT: Status indicators
a. PWR: This LED indicates power is applied to the unit.
b. VID: This LED is lit when HDMI video input is present.
c. ACT: This LED blinks when HDMI processor is active (normal).
4. HDMI OUT: HDMI local Output.
5. HDMI IN: HDMI Input port.
ULTRA-V-4S/8S Back
1. OUTPUTS: CAT6 Output ports to ULTRA-V-R Receivers. (Note: ULTRA- V-4S has output ports 1
through 4)
Hall Technologies
November 22, 2023
Page 8 of 12