ZyXEL Communications G-1000 V2 Quick Start Manual page 8

6 Select your IP address
assignment.
Select Obtain IP Address
Automatically if your G-1000 v2
is using a dynamically assigned
IP address from a DHCP server.
Select Use fixed IP address if
your G-1000 v2 is using a static
IP address.
7 Click Apply to complete the
wizard and implement the settings
on your device.
8 You have completed the wizard
setup. Click Finish on the next
screen to exit the wizard.
Note: If you changed the SSID on
your device or implemented
any security, then you will have
to make the corresponding
changes on your wireless
stations to reconnect to the AP.
If you changed the IP address
of your G-1000 v2 or if an IP
address is assigned to the G-
1000 v2 automatically, you can
access the device by using the
new IP address or typing
"http://zyxelXXXX"
(where XXXX are the last four digits of your devices MAC address) in your browser. The MAC
address can be found on the back label of your G-1000 v2.
ZyXEL G-1000 v2 Quick Start Guide
8