Function Buttons; Light Indicators - Honeywell FFP21633 User Manual

USE AND OPERATION (CONTINUED)

Function buttons

RESET button
You do not need to push this button to connect to Wi-Fi, the Feeder will
automatically be in this mode and ready to connect once plugged in.
To change the network configuration or reset the device follow the below steps:
To switch the connection mode, press and hold this button for 7 seconds
and wait for it to "beep" 3 times. The red/blue indicator light will be on for
6 seconds then switch to slow flashing to signal the transition to a hot
spot connection mode. After the machine is configured, press and hold
the button again until it "beeps" 3 times. The red/blue indicator lights will
stay on for 6 seconds indicating that the device has been restored to
factory settings.
FEED button
FEED
To manually dispense dry pet food, press "feed" button once.
Upon pressing the button, your recording will also play. To lock your feeder,
press and hold this button for 10 seconds. The red indicator will flash
twice when locked. Press and hold the button for 10 seconds again to
unlock the device.
Record button
Press and hold button to hear a single "beep" to begin recording.
To stop recording, release the button, listen for 2 "beep" sounds which
indicates that the recording is complete. The maximum recording time is
10 seconds. If not satisfied, you can repeat the steps to re-record. This
recording will play anytime food is dropped into the feeding tray, alerting
your pet that it's time to eat.

Light indicators

Blue Light:
Turn on: Fast flash for 3s
RESET
EN 5