Installation; Use And Operation; Control Panel - Honeywell FFP21633 User Manual

INSTALLATION

Device Set Up
1. Press in the two side buttons on the feeder lid and lift to find the power
cord and feeding tray inside.
2. Plug the feeding cord into the back of the feeder.
3. Remove the feeding tray from plastic and slide the pegs under the
bottom front of the feeder into the holes in the back of the feeding tray.
This should slide on easily and does not require force.
4. Plug the cord into an outlet for power. The device must be plugged into
a power outlet to connect to the Smart Pets App.
5. Add three D batteries for a backup power source.
6. To prepare your feeder for use, add dry kibble inside the top storage
compartment. For manual food delivery, press the "Feed" button to
release a single portion, roughly one tablespoon of kibble. You can press
the "Feed" button multiple times until your desired amount of food fills
the bowl. You can also use the Honeywell Smart Pets App to pre-program
scheduled feedings. Portions can be controlled from
meal, up to 10 meals per day (please consult with your veterinarian for
feeding recommendations).

USE AND OPERATION

Control panel

1. RESET Button
2. FEED Button
3. Record Button
RESET FEED
1 2 3
EN 4
cup to 1 cup per