Reheat; Dehydrate - Ninja AF140UK Instructions Manual

USING YOUR AIR FRYER – CONT.

Reheat

NOTE:
The temperature is preset to 170°C.
1 Ensure the crisper plate is inserted into
position in the drawer.
2 Press the REHEAT button. The default
temperature setting will display. Press
the TEMP up and down arrow buttons
to set your desired temperature.
3 Press the TIME up and down arrow
buttons to set the reheating time.
10
0800 862 0453
4 Add ingredients to the drawer. Insert the
drawer in the unit.
5 Press START/STOP to begin reheating.
6 When reheating is complete, the unit
will beep and End will appear on the
control panel display.
7 Remove ingredients by tipping them
out or by using oven gloves or silicone-
tipped tongs/utensils.

Dehydrate

NOTE:
The temperature is preset to 60°C.
1
Place your first layer of ingredients in
the bottom of the drawer. Install the
crisper plate into position inside the
drawer. Then set a second layer of
ingredients on the crisper plate.
NOTE: You can increase your
dehydrating capacity with the mid-level
rack. If the rack is not included with
your model, it is available for purchase
at ninjakitchen.co.uk.
2 Insert the drawer in the unit.
3 Press the DEHYDRATE button. The
default temperature will display. Use the
TEMP up and down arrow buttons to
set your desired temperature.
4 Press the TIME up and down arrow buttons
to set your desired dehydrating time.
5 Press START/STOP to start dehydrating.
6 When dehydrating is complete, the unit
will beep and End will appear on the
control panel display.
ninjakitchen.co.uk
11