Bake; Roast; Reheat; Dehydrate - Ninja Foodi AD150 Owner's Manual

COOKING IN YOUR 2-BASKET AIR FRYER – CONT .
Bake (Not available on all models.)
1 Install crisper plate in the basket (optional),
then place ingredients in the basket,
and insert basket in unit.
2 The unit will default to zone 1 (to
use zone 2 instead, select zone 2).
Select BAKE using the dial.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 25°F.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the dial to begin cooking.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
10 ninjakitchen.com

Roast

1 Install crisper plate in the basket (optional),
then place ingredients in the basket, and
insert basket in unit.
2 The unit will default to zone 1
(to use zone 2 instead, select zone 2).
Select ROAST using the dial.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the dial to begin cooking.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.

Reheat

1 Install crisper plate in the basket (optional),
then place ingredients in the basket, and
insert basket in unit.
2 The unit will default to zone 1 (to
use zone 2 instead, select zone 2).
Select REHEAT using the dial.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the dial to begin reheating.
5 When reheating is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.

Dehydrate

1 Place a single layer of ingredients in the
basket. Then install the crisper plate in
the basket on top of the ingredients and
place another layer of ingredients on the
crisper plate.
2 The unit will default to zone 1 (to use
zone 2 instead, select zone 2). Select
DEHYDRATE using the dial. The default
temperature will appear on the display.
Use the TEMP arrows to set the desired
temperature.
3 Use the TIME arrows to set the time in
15-minute increments from 1 to 12 hours.
Press the dial to begin dehydrating.
4 When cooking is complete, the unit will
beep and "End" will appear on the display.
5 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
ninjakitchen.com 11