AUDAC VC3 2 Series Installation Manual

INSTALLATION MANUAL
VC3xx2 SERIES 100V VOLUME CONTROLLER
INTRODUCTION
The VC3xx2 Series are 100 Volt wall volume controllers whereby the volume for 100 V loudspeakers can be
adjusted in 11 steps of 3 dB. They feature a slim and good looking design and are constructed out of sturdy
ABS, making them suitable for big projects in industrial environments as well as standard home interiors.
An integrated 24 Volt relay allows bypassing of the volume controller in priority situations, making sure the
message is always clearly heard at maximum volume. Connections are made using screw terminal blocks,
and flush and surface mount boxes (WB3102) are separately available.
Use only Hi-Z 100 V loudspeakers. Total loudspeaker power shall not exceed program power handling of
the volume controller.
J1 J2
1
2
3
IN+ IN-
LS-
Volume control
2-WIRE CONNECTION
IN+ IN- 24V 0V
Emergency
Enkel aan te sluiten door vakman
Connections only to be made by professionals
Seulement à brancher par un professionel
Nur anzuschließen von einem Fachmann
VC3022
Max. power load
20 Watt
AUDAC
4-WIRE CONNECTION
The 4-wire connection requires an amplifier with 24V output and a volume controller with a priority relay,
COM12 and COM24. In the 4-wire connection, the volume controller is set to the maximum during an
announcement from the connected microphone. Please note that when the volume controller is set to 0
both background music and emergency announcements are muted.
REV-1.0
0V 24V
LS+
DC
IN+ IN-
Enkel aan te sluiten door vakman
Connections only to be made by professionals
Seulement à brancher par un professionel
Nur anzuschließen von einem Fachmann
VC3022
LS+
Max. power load
AUDAC LS-
IN+ Input Plus
IN- Input Minus
24V Emergency 24V
0V Emergency 0V
LS+ Loudspeaker +
LS- Loudspeaker -
J1 J2
Normal Emergency 1-2 2-3
Reverse Emergency 2-3 1-2
J1 J2
1
2
3
IN+ IN- 0V 24V
LS- LS+
DC
Volume control
IN+ IN-
Enkel aan te sluiten door vakman
Connections only to be made by professionals
Seulement à brancher par un professionel
Nur anzuschließen von einem Fachmann
VC3022
Max. power load
AUDAC
24V 0V
IN+ Input Plus
Emergency
IN- Input Minus
24V Emergency 24V
0V Emergency 0V
LS+ Loudspeaker +
LS- Loudspeaker -
J1
Normal Emergency 1-2
20 Watt
Reverse Emergency 2-3
J1 J2
1
2
3
IN+ IN- 0V 24V
LS- LS+
DC
Volume control
24V 0V
IN+ Input Plus
Emergency
IN- Input Minus
24V Emergency 24V
0V Emergency 0V
LS+
LS+ Loudspeaker +
LS- Loudspeaker -
LS-
J1
Normal Emergency 1-2
20 Watt
Reverse Emergency 2-3
J2
2-3
1-2
LS+
LS-
J2
2-3
1-2