Subscribe to Our Youtube Channel
Related Manuals for AUDAC NCP105
Summary of Contents for AUDAC NCP105
- Page 1 Hardware Manual NCP105 80 [3,15] 38,2 [1,504] 8,5 [0,335] 56,15 [2,211] audac.eu...
- Page 2 This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality or software may have occurred since publication. To obtain the latest version of both manual and software, please visit the Audac website @ audac.eu. NCP105 - Quick Start Manual...
-
Page 3: Table Of Contents
Quick start guide ................14 Technical specifications Notes NCP105 - Quick Start Manual... - Page 4 NCP105 - Quick Start Manual...
-
Page 5: Introduction
The configuration of the button functions and the rotary dial is entirely flexible, with full compatibility of all AUDAC Touch functionalities. The NCP105’s design allows it to be used in many applications and with many different AUDAC or third- party AV equipment. From simultaneous multi-device support such as processors, amplifiers, sources to loudspeakers, the choice is yours. -
Page 6: Precautions
This will make sure that it will be recycled in an environmentally friendly manner, and will help to protect the environment in which we all live. NCP105 - Quick Start Manual... - Page 7 NCP105 - Quick Start Manual...
-
Page 8: Connections And Connectors
Brown Ethernet (POE): Used for connecting the NCP105 in your Ethernet network with PoE (power over Ethernet). The NCP105 complies with the IEEE 802.3 af/at standard, which allows IP telephones, wireless LAN Access Points, Security network cameras, and other IP-based terminals to receive power, in parallel to data, over the existing CAT-5 Ethernet infrastructure without the need to make any modifications in it. -
Page 9: Network Settings
Network settings STANDARD NETWORK SETTINGS DHCP: ON IP Address: Depending on DHCP Subnet Mask: 255.255.255.0 (Depending on DHCP) Gateway: 192.168.0.253 (Depending on DHCP) DNS 1: 8.8.4.4 (Depending on DHCP) DNS 2: 8.8.8.8 (Depending on DHCP) NCP105 - Quick Start Manual... -
Page 10: Overview Front Panel
The push rotary can have multiple functions and the status is indicated by the RGB LED. Any selected function through the 4 programmable buttons can be adjusted using the rotary dial. The LED ring can have multiple indication functions depending on the selected button. NCP105 - Quick Start Manual... -
Page 11: Overview Rear Panel
Overview rear panel The rear of the NCP105 contains an ethernet connection port which is used to connect the wall panel to the RJ45 connector. As the NCP105 is a universal network wall control panel with PoE, all data flow and powering are done through this single port. -
Page 12: Placing The Name Tag
Placing the name tag Custom name tags can be placed after removing the front cover of the NCP105. Step 1: Step 2: Step 3: NCP105 - Quick Start Manual... -
Page 13: Installation
PoE switch and the wall panel should be 100 meters. WB45S/FS or WB45S/FG (Optional) Removing the front cover The front panel of the NCP105 can be removed by using a flat head screwdriver in 5 steps. Step 1: Step 2: Step 3:... -
Page 14: Quick Start Guide
Chapter 3 Quick start guide This chapter guides you through the setup process for an NCP105 universal network/PoE wall panel controller connected to the network. The control of the system is done through the NCP105 or Audac Touch Connecting the NCP105 Connect your NCP105 universal network/PoE wall panel controller to a PoE-powered Ethernet network with a Cat5E (or better) networking cable. -
Page 15: Technical Specifications
Flush mount Installation Flush mount box for 45 x 45 mm wall panel - boxes Solid wall - WB45S/FS Flush mount box for 45 x 45 mm wall panel - Hollow wall - WB45S/FG Construction NCP105 - Quick Start Manual... -
Page 16: Notes
Discover more on audac.eu...
Need help?
Do you have a question about the NCP105 and is the answer not in the manual?
Questions and answers