Table of Contents
Advertisement
INSTALLATION
19
While you firmly keep hold of the front
sides of the drawer, have someone else
remove the basket from the drawer by
lifting it from the rail system.
Assembling
fhe CusfomChilP
Drawer
1
Grasp the door on each side and lower it
into place on the rail system.
4
Now disconnect
the wire harness
connection at the end of the right rail by
pressing on the tabs on either side. It may
help to use a small, flat-blade screwdriver
to apply pressure to the ends of the tabs
on either side.
2
Reconnect the wire harness to the
connection at the end of the right rail by
aligning the two ends and pushing them
together until you hear a click. The tabs
should snap back into place. Tug gently to
make sure the connection is secure.
Hold
both
sides
of the door and lift it to
remove
it from
the rail system.
)
NOTE
If you do not reconnect the wire
harness securely, the CustomChill TM
drawer will not work properly.
Advertisement
Table of Contents
