Table of Contents
Advertisement
•
Noise
may
appear
momentarily
in
the
CAUTION: Be sure not to short, disassemble,
viewfinder when recording is started or
heat or throw batteries into fire. This is very
stopped.
dangerous.
•
Be careful when touching the batteries with
-----
your bare hand to remove them as they are
warm during and just after use.
■ WHEN USING WITH THE AC ADAPTER/CHARGER (provided)
1. Connect one end of the DC cord (provided) to
NOTES:
the camera/recorder as shown in the figure.
• This AC adapter/charger is universal for use
2. Connect the other end of the DC cord to the DC
with AC 110 — 240V around the world. If you
OUTPUT jack of the AC adapter/charger.
use the camera/recorder in some foreign
3. Plug the AC adapter/charger power cord into
countries, an AC plug adapter (Not supplied)
an AC electrical outlet; the POWER indicator
may be necessary.
on the AC adapter/charger will come on.
• When using the AC adapter/charger to power
the camera/recorder, the battery level indi-
See the bottom of the AC adapter/charger.
cator may display " « ". This indicator is
The rating label is located on the bottom of
battery operation and has no mean-
the AC adapter/charger.
ing when using the AC adapter/charger to
-—-
power the camera/recorder.
• The AC adapter/charger cannot charge the bat¬
tery and operate the camera/recorder at the
same tim.e.
Remove the battery from the AC adapter/
charger to supply power to the camera/
recorder.
■ WHEN USING WITH THE CAR BATTERY (By using optional car battery cord)
1. Connect one end of the DC cord (provided) to
NOTES:
the camera/recorder, as illustrated.
• The car battery cord is designed to be used
2. Connect the other end of the DC cord to DC
only with automobiles having a 12/24-volt
OUTPUT of the car battery cord.
negative ground system.
3. Connect the car battery cord to the car's ciga-
• To prevent fire or shock hazard or damage to
rette lighter socket.
your camera/recorder, please use only the
specified car battery cord.
12
Advertisement
Table of Contents
