LG LDPH676 Series Owner's Manual page 44

44 TROUBLESHOOTING
Problem
bE
AE
FE
HE
tE
F3s
LE
F31
NE
, , , , , ,
P1 Pz P3 P4 Ps P6
P7
#, #, #, #
N: U: d: t
(# is a number.)
, , , ,
LO L1 Lz L3 L4
CL
Oversudsing caused by improper detergent, such as liquid dish soap.
• Do not use hand dishwashing liquids. Only use detergents which are designed for use in
automatic dishwashers.
• A error can appear if dishes soiled with a lot of foamy food, such as whipped cream, are
bE
loaded in the appliance. To clear the error, turn the appliance off and start a new cycle.
• To remove detergent residue in the tub, pour approximately 4 oz ~ 8 oz (100 ml ~ 200 ml)
of milk into a shallow bowl, place it in the upper rack and then run the appliance on the
Auto cycle.
Failure to level dishwasher.
• Make sure that the appliance is properly leveled.
Water leakage
• Turn off the water supply to the dishwasher and call an LG Electronics Customer
Information Center at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).
• The dishwasher makes an alert sound for 10 seconds, and runs the drain pump
intermittently. If power is turned off to the machine, the machine powers back on
automatically until the AE error is resolved.
Excessive Water supplied.
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).
Heater circuit failure.
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).
Water temperature sensor error
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).
Heated air temperature sensor error
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).
Wash motor error
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).
Heat air dry fan motor error
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).
Vario motor error
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).
The Download Cycle is selected.
• This is not an error code. This code indicates the current Download Cycle.
Test mode is selected.
• This is not an error code. This code is used when testing the dishwasher. Power the unit off
and on and the code will disappear.
Rinse aid level setting mode is selected.
• This is not an error code. This code indicates the current rinse aid level. For more
information, refer to the Adding Cleaning Products section.
Control Lock is activated.
• This is not an error code. This code indicates that the control lock is activated. Press and
hold Night Dry and Delay Start simultaneously for three seconds.
Possible Cause & Solution