Settings Tab; Global Key Sensitivity; Select Button Hold Time; Device/Editor Midi Thru - Keith McMillen Instruments 12 Step2 User Manual

12 S e
tep ditOr
2.5 S
ettinGS
The Settings tab where you set the sensitivity and select hold times, MIDI Thru and other 12 Step settings.
Changes made to the 12 Step settings are sent to the hardware in realtime.
G k S
lObal ey
Sets the overall sensitivity of the keys. The RESET GLOBAL SENSITIVITY button directly below the slider will
set the global sensitivity to the default value when clicked.
S b
eleCt UttOn
Sets the time it takes to engage the Select button. The RESET SELECT HOLD TIME button directly below the
slider will set the select time to the default value when clicked.
d /e
eviCe ditOr
Send incoming 12 Step2 MIDI data to the selected port. Useful for controlling devices without a DAW.
Note for Windows users: Windows cannot share MIDI drivers between multiple applications. Use this MIDI
Thru to audition changes while editing 12 Step settings.
b b
aCkliGht riGhtneSS
Adjusts the brightness of the 12 Step2 key backlight LEDs. This feature is only available when using 12 Step2,
and is disabled when legacy hardware is connected.
S f v
end Ull OlUMe
Enables/Disables the CC 7 127 message the 12 Step outputs on preset changes.
v O
elOCity verride
Enable to transmit all MIDI Notes at full velocity (127), ignoring all velocity-related settings in the modlines.
When disabled, all presets will respond to velocity as normal.
p C
rOGraM hanGe
Selects which MIDI channel the 12 Step responds to when receiving Program Change messages to change
presets. LED CC and CV NRPN messages are also recognized on this channel.
t
ab
enSitivity
h t
Old iMe
Midi t
hrU
C
OntrOl
O p
n reSet
p C
reSet OntrOl
C S
hanGe WitCh
12 S 2
tep
24