Jeken JCFS282AW-11 Instructions For Use Manual page 61

1. Screw off the four bolts which
in top right with cross opener and
take off the cover.
2. Screw off the one bolt which in
left hinge cover with cross
opener and take it off.
3. Disconnect the light switch(1)
and take it off.
4. Screw off the three bolts in left
hinge and take them off.
5. Disconnect the electrical
connector.
6. Take off the cover on door
left(2) and put the wire into the
hole and cover it
7. Lift the door upwards to
disengage it from the bottom
hinge, put the door to one side
and lay it down gently on a
padded surface.
8. Screw off the bottom hinge
part and foot.
9. Disassemble the hinge to four
parts: (3)foot; (4)nut; (5)hinge;
(6)hinge pin.
10. Remove the hinge pin from
left hole to right hole and
assemble the four parts.
-21 -
2
6
5
4
3