Door Reverse - Jeken JCFS282AW-11 Instructions For Use Manual

back into the mains socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks
can cause seals to stick to the cabinet and tear when you
open the door. Wash seal with a mild detergent and
warm water. Rinse and dry it thoroughly after cleaning.
Caution !
Only after the door seals are completely dry should the

appliance be powered on.
Replacing the LED light
Warning : The LED light must not be replaced by the user! If
the LED light is damaged, contact the customer helpline

DOOR REVERSE

The side at which the door opens can be changed, from
the right side (as supplied) to the left side, if the installation
site requires.
Warning ! When reversing the door, the appliance must not
be connected to the mains. Ensure that the plug is
removed from the mains socket.
Note : Before you start lay the appliance on its back in
order to gain access to the base, you should rest it on soft
foam packaging or similar material to avoid damaging
the backboard. Stand the appliance upright. Open the
door to take out all door racks (to avoid racks
damaged)and then close the door.
To reverse the door, the following steps are generally
recommended:
-20-