Advertisement
5.9.
POWER SUPPLY MODE: This battery charger is fitted with a DC power supply mode. This mode will deliver a constant 13.5 Volts at
8/12/16 Amps and can be used for powering 12V DC appliances, lighting or used for testing 12V devices. The DC power supply also
has overload and short circuit protection.
TO ENTER THE DC POWER SUPPLY MODE:
• Connect unit to 240V AC and switch the 240V AC ON.
• Press the button twice until the DC SUPPLY LED indicator is illuminated.
• Connect the RED lead (Battery Clip) to the positive input on the device.
• Connect the Black lead (Battery Clip) to the negative input on the device.
• To switch off power supply; unplug the AC power.
• Disconnect the DC power leads from the device.
• The DC power mode will automatically turn off and revert to Battery Charging when the charger is turned off and powered back on.
WARNING: DO NOT ENABLE DC POWER SUPPLY MODE WHEN CONNECTED TO A BATTERY IN ORDER TO PREVENT SEVERE
‰
BATTERY FAILURE.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 60 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
SPBC8.V2 SPBC12.V2 SPBC16.V2 Issue 1 28/11/23
REGISTER YOUR
PURCHASE HERE
Advertisement
