Gigabyte TO25-Z12-AA01 User Manual page 82

5-3-2-1 Memory Addressing
Parameter
Memory Addressing
NUMA nodes per socket
Memory interleaving
1TB remap
DRAM map inversion
Location of private memory
regions
CXL Memory interleaving
CXL Sublink interleaving
Description
Specifies the number of desired NUMA nodes per socket.
Options available: NPS0,NPS1,NPS2,NPS4, Auto. Default setting is Auto.
NOTE!
• Available options may vary by system configuration.
• Only dual processor configuration supports NPS0.
Enable/Disable the Memory interleaving feature.
Options available: Disabled, Auto, Enabled. Default setting is Auto.
Enable/Disable to remap DRAM out of the space just below the 1TB boundary.
The ability to remap depends on DRAM configuration, NPS, and interleaving
selection, and may not always be possible.
Options available: Do not remap, Attempt to remap, Auto.
Default setting is Auto.
Enable/Disable the DRAM map inversion function.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Controls whether or not the private memory regions (PSP, SMU and CC6) are
at the top of DRAM or distributed.
Options available: Distributed, Consolidated, Auto. Default setting is Auto.
Allows for enabling/disabling CXL memory devices interleaving.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Enable or disable CXL sublink interleaving.
Options available: Enable, Disable, Auto. Default setting is Auto.
BIOS Setup
- 82 -